Bianchi Impulso E-Allroad Ultegra/105 11sp Compact Hydr 2018
The Bianchi IMPULSO E-ALLROAD is a bike designed to handle almost any surface, on which it is perfectly controllable and incredibly fast. The geometry ensures a comfortable seat in which you can last several hours and enjoy riding wherever you go with this bike.
Frame: Impulso E-Road alu triple hydroforming technology, integrated headset 1.1/8", 700C, thru axle OLD 142mm, flat mount Disc, size: 47-50-53-55-57-59-61-63cm
Fork: Bianchi Full carbon 1.1/8", 12x100mm, Flat Mount
Ch. composition: Fsa No.8B/ZS4D 1.1/8"
Shifting: Shimano ST-RS505 2x11sp
Derailleur: Shimano Ultegra RD-R8000 GS 11sp
Derailleur: Shimano 105 FD-5801-L
Cranks: Fsa crank 50x34T, crank length 170mm
Central composition: included w/motor unit
Chain: Kmc X11 EPT finish
Cassette: Shimano 105 CS-5800 11sp, 11-12-13-14-16-18-20-22-25-28-32T
Brakes: Shimano BR-RS505
Brake levers: Included w/shifters
Wheels: Fulcum Racing 700 disc brake CX
Tires: Kenda Flintridge 700x40
Stem: Reparto Corse 3D forged Alloy6061, 7°, 31.8mm, 1.1/8", ext: 70mm-44/46cm, 90mm-50/53cm, 100mm-55cm, 110mm-57/59cm, 120mm-61/63cm
Handlebars: Reparto Corse, alloy 6061 diam. 31.8mm, reach 70mm, flare angle 16°, drop c/c 120-40cm, drop 130mm42/46cm, size: 40cm-47/53cm, 42cm-55/59cm, 44cm-61/63cm
Seatpost: Reparto Corse AL6061 shaft, alloy head, 15mm offset, diam. 31.6mm, Length: 300mm-44/46cm, 350mm-50/63cm
Seat: Selle San Marco Monza Dynamic, Steel Rails, 277x131mm
Disc: Shimano SM-RT70, diam. 160mm
Bottle: Bianchi Loli 600ml
Engine: Polini EP3, w/battery pack 500W - 36V - 13.6Ah, EP3 display, magnet and wheel sensor
Model year | 2018 |
Gears | 2x11 |
Groupset | Shimano Ultegra, Shimano 105 |
Material | aluminium |
Battery | 500 Wh |
product ID | 52414 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews