Giant Road E + 1 Pro, model 2018
AluxX SL Aluminum frame
Advanced Composite fork, fixed axle 12x100 mm, OverDrive 2 post
Giant Contact handlebars
Stem Giant Contact SL OD2
Seatpost Giant Contact Composite, carbon, 27.2 mm, length 375 mm
Saddle Giant Contact SL Neutral
Shimano RS685 Disc transmission, 2x11 gears
Shimano derailleur
Shimano derailleur
Shimano R785 Disc brakes, hydraulic, 160 mm discs (Ice-Tech)
Shimano RS685 Disc brake levers
Shimano 105 11-32 teeth cassette
KMC X. 11e chain, especially for electric bikes
FSA cranks, made especially for Giant, 50/34 tooth converters
Giant P-R2 Disc rims
Giant Performance Tracker Road hubs, encapsulated bearings, 12mm fixed axle front and rear
SAPI E-Lite wires, especially for electric bikes
Tires Schwalbe Durano RaceGuard, 32-622 (28x1.25)
Giant EnergyPak 4A quick charger accessories
Giant SyncDrive Pro engine, powered by YAMAHA, 80 Nm, 250 W, 5 driving modes
Giant PedalPlu sensors with 4-sensor technology
Giant RideControl EVO control unit, grip control, walk assist function, micro USB connector
Giant EnergyPak 500 Wh, 36 V, 13.8 Ah, Li-Ion battery
Model year | 2018 |
Gears | 2x11 |
Battery | 500 Wh |
product ID | 76221 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews