Lapierre OVERVOLT GLP 700 CARBON ULTIMATE, model 2019
Year: 2019
Wheel size: 27.5"
Frame: OVERVOLT GRAVITY LOGIC OST + 160 mm BOSCH CARBON BOOST
Fork: RockShox YARI RC MOTION CONTROL 29" BOOST 15x110 mm TRAVEL
Derailleur: SRAM GX EAGLE 12 spd
Cranks: RACEFACE RIDE 30T DIRECT MOUNT STEEL 165 mm (XS), 170 mm (S), 175 mm (M, L, XL)
Cassette: SRAM NX EAGLE 11-50T 12 spd
Chain: SRAM NX EAGLE PowerLock
Brakes: SRAM GUIDE RE
Shifting: SRAM GX EAGLE SINGLE CLICK 12s
Head composition: FSA ORBIT 1.5 ZS NO.57SC
Handlebars: Lapierre ALLOY 6061DB W: 760 mm R: 15 mm Ø: 31.8 mm
Grips: Lapierre DD34 LOCK ON
Stem: Lapierre ALLOY Ø: 31.8 mm L: 45 mm
Saddle: Lapierre by VELO
Front hub: FORMULA SEALED BEARINGS 15x110 BOOST
Rear hub: FORMULA SEALED BEARINGS 12x148 BOOST SHIMANO DRIVER 32H
Rims: Lapierre e-AM + 32H 584-35c
Tires : MAXXIS 27.5x2.8 HIGH ROLLER II EXO 3C MAXTERRA / REKON + EXO PROTECTION TUBELESS READY
Pedals: FPD NW-91K
Accessories: BOSCH CHARGER 4A
Discs: SRAM CENTERLINE 200 mm / 200 mm
Front stroke: 150 mm
Rear stroke: 150 mm
Engine: BOSCH PERFORMANCE CX 500 Wh PURION
Model year | 2019 |
Gears | 1x12 |
Material | carbon fiber |
Drive | Bosch Performance CX |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 64193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews