Lapierre Lapierre Overvolt GLP II Team, model 2020
Lapierre GLP II (Gravity Logic Project) is a revolutionary enduro e-bike that takes e-bike riding to new heights.
Significantly improve handling and driving characteristics by combining a rigid and lightweight carbon frame, a low center of gravity and a weight that is ideally distributed in the middle between the wheels.
The GLP II with the Bosch Performance CX engine is a truly exceptional sports e-bike, distinguished by its innovative design, handling and natural riding characteristics.
Category: MTB FULLY
Material: carbon
Wheel size: 27.5 "+ 29"
Frame: OVERVOLT 160mm INTEGRATED BOSCH CARBONE BOOST
Fork: RockShox lyrics ULTIMATE RCT3 CHARGER 29 '' BOOST 15x110 160M 42MM OFFSET
Derailleur: SRAM AXS EAGLE 12spd
Cranks: E13 E-spec + Alloy 165mm + SRAM XSYNC EAGLE 34T
Cassette: SRAM PG1230 EAGLE 11-50T
Chain: SRAM NX EAGLE PowerLock
Brakes: SRAM G2 RSC 4 pistons
Gearing : SRAM AXS EAGLE 12spd
Head composition: FSA Orbit 1.5 ZS NO.57SC / NO.57T
Handlebars: Lapierre ALLOY 6061DB W: 760mm W: 15mm Ø: 31.8mm
Grips: Lapierre GRIPS
Stem: Lapierre CNC Ø: 31.8mm L: 35mm (S, M) 45MM (L, XL)
Seatpost : Lapierre DROPPER + TRIGGER Ø: 31.6 mm travel: 100mm (S) 125mm (M) 150mm (L, XL)
Saddle: Lapierre by VELO
Tires: MAXXIS FT: 29x2.5 ASSEGAI EXO + 3C MAXTERRA / RR: 27.5x2.8 M INION DHR II EXO + 3C MAXTERRA Tread
Pedals: VP VPE-527
Twisted wheels: Lapierre EAM + CARBON FRONT: 622x30c / REAR: 584x35c J-bend
Wheels: SRAM CENTER LINE 220mm / 200mm
Muffler: RockShox SUPER DELUXE SELECT + RT TRUNNION 205x60MM
Rear stroke: 160 mm
Engine: BOSCH PERFORMANCE CX GEN4 500Wh POWERPACK PURION
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM NX |
Material | carbon fiber |
Drive | Bosch Performance CX |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 88271 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews