Lapierre e-Zesty AM LTD ULTIMATE, model 2021
Lapierre e-Zesty AM LTD Ultimate with the unique fully integrated Fazu motorization with extra light weight.
At Lapierre we feel the need to offer bikes for everyone. Our mission was to offer a bicycle also for "electro-skeptics", or for people who do not need an ebike, but would welcome the help of an electric motor in some situations. And so we combined our best know-how to launch the new generation of e-MTB AM.
With the light Fazua engine, we managed to construct an eMTB bike that, despite the motorization, retains the most natural feeling of riding.
With the light Fazua engine, we managed to construct an eMTB bike that, despite the motorization, retains the most natural feeling of riding.
The Lapierre e-Zesty AM LTD Ultimate is the lightest all mountain ebike on 27.5 inch wheels with a lift of 150mm and a Fazua mid-motor with a fully integrated battery hidden in the lower frame tube. A small but powerful motor delivers a nominal power of 400W. The torque of 60Nm, in conjunction with the 252Wh battery, is an ideal partner for climbing hills. The battery range is up to 75 km depending on the use of the three assistance level modes.
The total weight of the Lapierre e-Zesty AM, including the Fazua motor, is around a great 18kg. The carbon frame provides higher stiffness and better acceleration. The entire electric drive weighs only 5 kg!
Another indisputable advantage is the entire Fauza drive system – motor and battery forming one block, you can very easily and effortlessly remove it from the lower frame tube, put on the cover – save another 5 kg and ride like a classic bike without a motor!
Material: Carbon
Frame: eZesty AM FULL CARBON ULTIMATE 150mm travel, BOOST, METRIC, THRU AXLE
Fork: FOX 36 FLOAT FACTORY Kashima BOOST 15x110 160mm
Derailleur: SRAM X01 CARBON EAGLE 12SPD
Cranks: FSA CARBON e-Bike ISIS 170mm w / SRAM XSYNC II 32T RING
Cassette: SRAM PG1230 EAGLE 11-50 12SPD
Chain: SRAM NX EAGLE 12SPD
Brakes: SRAM GUIDE RE
Shifting: SRAM GX EAGLE Matchmaker SINGLE CLICK 12SPD
Head composition: FSA ORBIT ZERO STACK
Handlebars: RACE FACE SIXC CARBON 20MMx785MM
Grips: Lapierre Grips "FIT"
Stem: LP FULL CNC 0 ° 35MM (M, L), 45MM (XL)
Seat post : LP CARBON DROPPER 125 (M), 150 (L, XL)
Saddle: Lapierre CrMo by Velo
Tyres: 2x MAXXIS HIGH ROLLER II WIDE TRAIL 27.5x2.5 WT 3C MAXXTERRA EXO
Pedals: NW 91K steel cage
Braided wheels: LP EAM + CARBON 584x33 BOOST, TUBELESS READY
Wheels: SRAM CENTERLINE 200/200
Damper: FOX FLOAT DPS FACTORY Kashima LV EVOL TRUNNION
Engine: Fazua EVATION 1.0 DRIVE PACK + 250Wh BATTERY PACK / NEW TOUCH REMOTE / NEW LOCK
Model year | 2021 |
Gears | 1x12 |
Groupset | SRAM X01, SRAM GX, SRAM NX |
Material | carbon fiber |
Drive | Fazua |
Battery | 250 Wh |
Brakes | Hydraulic disc brakes |
product ID | 88258 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews