Haibike AllTrail 5 27.5 electric bike, gloss dyn red/black ink
Haibike AllTrail 5 27.5 electric bike
Drive |
Yamaha, PW-ST System, 250 W, 70 Nm, 25 km/h
|
Battery |
InTube, 630 Wh
|
Display |
Yamaha, Side Switch, 1.7" LCD, 7 functions
|
Frame |
Haibike, FullNine Yamaha i630, Aluminum 6061
|
Fork |
RockShox, 35 Silver, Steel spring, 120 mm travel, Aluminum steerer tube 1 1/8" - 1 1/2" tapered, 15 x 110 mm thru-axle Boost
|
Shock |
RockShox, Monarch R, Air
|
Shifting |
Shimano, Deore M6100, Trigger switch
|
Derailleur |
Shimano, Deore M6100
|
Cassette |
Shimano, M6100, 10 - 51T
|
Chain |
Shimano, CN-M6100
|
Cranks |
Haibike Components, The Crank +, Aluminum
|
Converter |
Steel, 36T
|
Brakes |
Tektro, Orion M745, 4-piston disc brake
|
Brake levers |
Tektro, Orion M745, Aluminum
|
Rims |
Rodi, Tryp 30, With Eyelets, Double Wall, Aluminum
|
Spokes |
Sapim, Leader
|
Seat post |
Dropper-Post Remote 31.6, Aluminum, Telescope, 31.6 mm
|
Saddle |
Selle Bassano, Reko R2 E-Sport
|
Stem |
Haibike Components, TheStem ++, A-head, 31.8 mm, 7.0 degrees
|
Handlebars |
Haibike Components, TheBar ++, 780 mm
|
Grips |
Haibike, MTB grips
|
Headset |
Feimin, A-Head Tapered, Ball bearing
|
Pedals |
Freeridepedal, Aluminium, with Reflector
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Groupset | Shimano Deore |
Size | S, M, L |
Colour | gloss dyn red/black ink |
Material | aluminium |
Wheel diameter | 27.5" |
Drive | Yamaha |
Battery | 630 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 120 mm |
Shock | Air |
Rear travel | 120 mm |
product ID | 244695 |
The table is indicative. On the manufacturer's website, you will find geometry and an accurate calculator for each model, which calculates the size based on height, leg and arm length, and preferred riding style.
Size | S | M | L | XL |
---|---|---|---|---|
Rider height (cm) | 159 - 170 | 168 - 179 | 177 - 188 | 186 - 196 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews