Giant Stance E+ EX Pro 29 bike, cold Iron
Control unit: RideControl Dash, full color LCD screen
Display: RideControl Dash, full color LCD screen
Battery: EnergyPak Smart 625Wh
Color: Good Grey
Frame: ALUXX Aluminum, 120mm FlexPoint suspension system
Fork: RockShox Recon Silver RL, 130mm travel, Lock-out, Tapered Steerer, 15x110mm Boost, MaxleLite, e-MTB optimized
Damper: RockShox Monarch RT, High Volume, 184x44mm, custom tuned
Handlebars: Giant Connect TR Riser 31.8x780mm
Grips: Giant Tactal single lock-on
Stem: Giant Contact
Seatpost: Giant Contact Switch, dropper, 30.9mm (S:100/M:125/L:150/XL:170)
Saddle: Giant Romero Trail
Shifting: Shimano Deore
Derailleur: MRP 1X custom "V3" co-molded TR chain guide
Derailleur: Shimano Deore 12-speed
Brakes: Shimano BR-M420, 4-piston, hydraulic disc, 203mm
Brake levers: Shimano Deore BL-M4100, I-spec EV
Cassette: Shimano CS-M6100-12, 10-51T, 12-speed
Chain: KMC e.12 Turbo, EcoProteq, e-bike optimized
Cranks: Praxis Wavetm 36T Cold Forged 4130 premium steel Praxis e-Cadet+ custom forged crankarm set (Q-factor=168, S:160, M/L:165, XL:170)
Rims: Giant AM 29", Tubeless ready, 30mm inner width
Hubs: Shimano MT410 Boost, Center-Lock, [F] 110x15 [R] 148x12mm MicroSpline Drive Body Thru-axle
Spikes : Sapim E-Lite [R] Race [F], e-bike optimized
Tires : Maxxis Rekon 29x2.25" foldable, 60tpi, EXO, Tubeless Ready
Accessories: Tubeless kit (liquid, valves, levers, manual, tool)
Light: Herrmans H-BLACK MR8
Carrier: Giant Rack-It MIK
Model year | 2022 |
Gears | 1x12 |
Material | aluminium |
Drive | Yamaha |
Battery | 625 Wh |
Brakes | Hydraulic disc brakes |
product ID | 187787 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews