GHOST E-Riot AM Essential 29 e-bike, khaki/light khaki
GHOST E-Riot AM Essential 29 electric bicycle
The GHOST E-RIOT is a true All Mountain e-bike with 160 mm of front and rear travel. It perfectly copes with the terrain that you assign to it. Tuned SUPERFIT® geometry and the new Traction Link® suspension system keep the rear wheel in contact with the surface unless you want it to be. The all-new Bosch Smart System® includes the new Kiox 300 display and the Performance CX engine. With the inflated 625 Wh battery, you can get lost in the mountains for the whole day in peace, and it will still bring you home reliably. So jump in and go, have fun... EXPECT RIOT!- Super-responsive Traction Link® suspension (Virtual Pivot)
- Rear construction from one piece of aluminium with maximum torsional rigidity
- SUPERFIT® geometry
- Compact BOSCH Performance CX Smart System drive with 85 Nm of torque
- Integrated Bosch Powertube 625 Wh Smart System battery
- Easily accessible charging port with rubber protective cap
- The same size of all pins
- One-piece rocker arms with maximum stiffness
- Hidden, easily accessible cabling
- Dropper seatpost
- Anchoring the rear brake caliper to a fixed axle - transfers less force and vibration to the rear structure
- Acros Blocklock headset
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
Drive |
Bosch Performance CX GEN4 85 Nm motor
|
Battery |
Bosch PowerTube 625 Wh
|
Display |
Bosch Purion
|
Frame |
E-RIOT AL
|
Fork |
Rock Shox 35 Silver TK Solo Air 160 mm
|
Shock |
Rock Shox Super Deluxe Select R 160 mm
|
Shifting |
SRAM SX EAGLE single click
|
Derailleur |
SRAM SX Eagle 12-S
|
Cassette |
SRAM PG-1210 11-50T
|
Chain |
SRAM SX Eagle
|
Cranks |
e*thirteen e*spec Plus 34T
|
Brakes |
Tektro HD-M750 203 mm Disc / Tektro TR203 mm/203 mm
|
Brake levers |
Tektro HD-M750
|
Rims |
WTB ST i30 / WTB ST i30
|
Hubs |
DT Swiss 370 Classic 15x110 mm / DT Swiss 370 Classic 12x148 mm
|
Front tire |
Maxxis Minion DHF 3C MaxxTerra Exo+ 2.5
|
Rear tire |
Maxxis Minion DHR II 3C MaxxTerra Exo+ 2.6
|
Seat post |
Limotec Alpha 1 34.9 mm, 125 mm (S), 150 mm (M), 170 mm (L/XL)
|
Saddle |
Fizik Terra Aidon
|
Stem |
Ground Fiftyone Dia. 31.8 mm
|
Handlebars |
Ground Fiftyone Dia. 31.8 mm, 760/15 mm (S), 780/15 mm (M-L), 780/40 mm (XL)
|
Grips |
WTB Wafel
|
Headset |
Acros Blocklock 135° AZX-582
|
Pedals |
VPE-527
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Groupset | SRAM SX |
Colour | khaki/light khaki |
Material | aluminium |
Wheel diameter | 29" |
Drive | Bosch Performance CX |
Battery | 625 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 160 mm |
Shock | Air |
Rear travel | 160 mm |
Telescopic seat post | yes |
product ID | 141423 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews