GHOST E-Riot AM Essential 27.5 electric bike, khaki/light khaki
The GHOST E-RIOT is a true All Mountain ebike with 160mm of front and rear travel. It perfectly copes with the terrain that you assign to it. Tuned SUPERFIT® geometry and the new Traction Link® suspension system keep the rear wheel in contact with the surface unless you want it to be. The offer includes models on both aluminum and carbon frames and in several mounting levels. With this electric bike, you can enjoy the flow without blood and with a little sweat on the way up and then send it down with confidence. The all-new Bosch Smart System® includes the new Kiox 300 display and the Performance CX engine. With the inflated 750Wh battery, you can get lost in the mountains for the whole day in peace, and it will still bring you home reliably. So jump in and go have fun. …EXPECT RIOT!
- Super-responsive Traction Link® suspension (Virtual Pivot)
- Rear construction from one piece of aluminum with maximum torsional rigidity
- SUPERFIT® geometry
- Compact BOSCH Performance CX Smart System motor with 85 Nm of torque
- Integrated Bosch Powertube 625 Wh Smart System battery
- Easily accessible charging port with rubber protective cap
- The same size of all pins
- One-piece rockers with maximum stiffness
- Hidden, easily accessible cabling
- Telescopic seat post
- Anchoring the rear brake caliper to a fixed axle - transfers less force and vibration to the rear structure
- Acros Blocklock head composition
Battery: Bosch PowerTube 625 Wh
Frame: E-RIOT AL
Material: Aluminum
Fork: Rock Shox 35 Silver TK Solo Air 160 mm
Damper: Rock Shox Super Deluxe Select R 160 mm
Head composition: Acros Blocklock 135° AZX-582
Derailleur: SRAM SX Eagle 12-S
Shifting: SRAM SX Eagle Single Click
Number of speeds: 1x12
Cassette: SRAM PG-1210 11-50
Chain: SRAM SX Eagle
Cranks: e*thirteen e*spec Plus 34T
Brakes: Tektro HD-M750 203 mm Disc / Tektro TR203-17 203 mm
Brake levers: Tektro HD-M750
Hubs: DT Swiss 370 Classic 15x110 mm / DT Swiss 370 Classic 12x148 mm
Rims: WTB ST i30 / WTB ST i30
Front tire: Maxxis Minion DHF 3C MaxxTerra Exo+ 2.5
Rear tire: Maxxis Minion DHR II 3C MaxxTerra Exo+ 2.6
Seat post: Limotec Alpha 1 34.9 mm 125 (S) 150 (M) 170 (L/XL)
Saddle: Fizik Terra Aidon
Stem: Ground Fiftyone Dia. 31.8 mm
Handlebars: Ground Fiftyone Dia. 31.8 mm 760/15 (S) 780/15 (ML) 780/40 (XL)
Grips: WTB Wafel
Pedals: VPE-527
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
27.5” wheels
Universal size for a wide range of bicycles. The advantage is better cross-country ability, higher traction and comfort, and still good dexterity. Slightly heavier.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
| Model year | 2022 |
| Gears | 1x12 |
| Material | aluminium |
| Drive | Bosch Performance CX |
| Battery | 625 Wh |
| Brakes | Hydraulic disc brakes |
| product ID | 206712 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
savings Ghost adapter for the Ghost Nirvana stand, 18 mm pitch
20.99 €
savings
RRP 31.49 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews