Fuji BlackHill Evo 29 1.1 Brushed Raw Aluminum with Charcoal and Black decals, gloss finish, model 2019
Fork: Fox 34 Performance Float 29, remote LO "" GRIP "", 3-position w / tapered alloy steerer, Boost 110 x 15mm thru axle, travel 120mm
Muffler: Fox Float Performance EVOL 3-position adjustment, lockout, 210 x 50mm
Cranks: FSA CK-745 / IS / 14T / w / chainguard
Center composition: Bosch System ISIS drive
Derailleur: Shimano XT M8000, Shadow Plus
Gearing: Shimano XT M8000, Rapid Fire
Cassette: Shimano SLX M7000, 11-42T, 11-speed
Chain: KMC e11S w / MissingLink, 11-speed
Wheels: Oval Concepts 400 Boost, CL hubs, 110 x 15mm & 148 x 12mm thru axle, 14 / 15g stainless steel spokes, 29 "" 28H tubeless compatible rims
Tires: Schwalbe Nobby Nic Performance, Addix, folding, 29 "" x 2.35 "", 67tpi
Brakes: Shimano XT M8000 hydraulic disc, ICE Tech rotors: 203mm front, 180mm rear
Brake levers: Shimano XT M8000 hydraulic disc 2 finger lever
Head composition: FSA NO.9M, 1 1/8 "" - 1.5 "", sealed cartridge bearings
Handlebars: Oval Concepts 605 flat bar, 7050 alloy, +/- 5mm rise, 9 degree sweep, 31.8mm clamp
Stem: Oval Concepts 600AM, 3D-forged 6061 alloy, 0 degree, 31.8mm clamp
Grips: Oval Concepts 634 Trail, single LO, dual density Kraton
Saddle: Oval Concepts 438 Trail, steel rail
Seatpost: KS LEV Integra Dropper, 30.9mm, remote, 17, 19, 21 "" - 125mm travel
Weight: 22.90 kg / 50.47 lbs
Engine: Bosch Performance CX, mid-motor, 250W rated power, 20mph or 25kph maximum assist
Battery: Bosch Power Tube 500Wh w / charger
Display: Bosch Purion
Model year | 2019 |
Gears | 1x11 |
Groupset | Shimano XT, Shimano SLX |
Material | aluminium |
Drive | Bosch Performance CX |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 78110 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews