Rock Machine bike RM CROSSRIDE e500 - 28 Steps Sport (test), model 2016
This bike is ridden and was used as a test bike. For this reason, it is discounted. By confirming the order, the customer declares that he has been informed of this fact and is aware that this is not a new bicycle. Defects caused by use: Driven 670 km, Scratches frame, upper frame tube, forks, rear structure, cranks, derailleur.
Weight: 17.5 kg
Frame/stroke (R/Z mm): Alu 6061.T6 STePS Multibutted, 28
Fork: KS S3 ExaForm Alloy
Cranks: Shimano Steps 44T
Rear derailleur: Shimano Deore SGS Shadow
Shifters : Shimano Acera 1x9 RapidFire Plus
Cassette: Shimano HG200-9 11-32T
Chain: Shimano CN-6070-9
Brakes: Shimano BR-M355 hydraulic disc brake, rotor 160/160mm
Central composition: Shimano STePS Drive unit
Head composition: FSA No.10 Semi-Cartrige
Pedals: Marwi SP-610
Hubs: Shimano HB/FH-TX505 CL
Rims: Weinmann U28 Disc Sport 32H
Spikes : Sapim stainless
Tires : Schwalbe Silento 700x40C
Stem: ONE Sport 31.8mm
Handlebars: ONE Sport
Grips: Velo Ergo dual density kraton-gel
Seat post: ONE Sport
Saddle: Selle Royal Ariel
Model year | 2016 |
Gears | 1x9 |
Material | aluminium |
Battery | 400 Wh |
Brakes | Hydraulic disc brakes |
product ID | 84981 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews