Orbea Wild HT 20S 27.5", model 2019, red-black
Fork: Fox 34 Float Performance 120 3-Position QR15x110 E-Bike Optimized
Shifting: SRAM NX Eagle Single click
Derailleur: SRAM NX Eagle
Brakes: SRAM Guide Hydraulic disc
Cranks: SRAM X-SYNC Eagle 34T
Cassette: SRAM NX PG-1230 Eagle 11-50t 12-Speed
Handlebars: Race Face Ride 35 20mm Rise 760mm
Headstock: Acros Alloy 1-1/8 - 1-1/2" Integrated
Stem: Race Face Ride 35mm interface
Chain: SRAM NX Eagle 12-Speed
Splined wheels: DT Swiss H-1900 Spline 35c TLR 15/110mm IS (6-bolt)
Tires: Kenda 1184A Havok 27.5x2.8" 120TPI TLR (E-MTB specific)
Seatpost: Race Face Aeffect Dropper 31.6x385/125mm
Saddle: Selle Royal 2077 DRN
Pedals: VP-537 Black
Lock: Abus battery down tube lock
Motor: Shimano Steps DU-E8000
Battery: Shimano Steps E8010 500 Wh
Model year | 2019 |
Gears | 1x12 |
Groupset | SRAM NX |
Material | aluminium |
Drive | Shimano STePS E8000 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 82548 |
Road
Size | 47 | 49 | 51 | 53 | 55 | 57 | 60 |
---|---|---|---|---|---|---|---|
Rider height (cm) | 155 - 160 | 160 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
Size | XS | S | M | L | XL | XXL |
---|---|---|---|---|---|---|
Rider height (cm) | 155 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
Size | S | M | L | XL |
---|---|---|---|---|
Rider height (cm) | 155 - 170 | 165 - 180 | 179 - 190 | 185 - 198 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 150 - 160 | 160 - 170 | 170 - 180 | 180 - 190 | 190 - 200 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews