Kellys Tygon R90 29 electric bike, gray
Kellys Tygon R90 29 electric bike
Built for regular rides on unpaved and forest roads, with equipment with a good balance of durability, functionality and performance.
Drive |
Shimano STEPS E7000, 36 V
|
Battery |
KELLYS Re-Charge V10 Li-ion internal removable 725 Wh / capacity 20 Ah, powered by BMZ
|
Cycling computer |
Shimano SC-E5000 cycle computer with assist switch
|
Frame |
KELLYS TYGON R series - advanced robotic welded 6-series aluminum alloy, integrated removable battery, 1.5“ tapered HT, 12x148 mm Boost thru axle / Made in EU
|
Fork |
RockShox Recon Gold RL (29) Boost, 120 mm, DebonAir / Motion Control / Maxle Stealth 15 mm thru axle
|
Shifting |
SHIMANO Deore (021) SL-M6100-IR Rapidfire Plus (I-Spec EV)
|
Derailleur |
SHIMANO SLX M7100 (direct mount)
|
Cassette |
Shimano CS-M6100-12 (10-51T)
|
Chain |
SHIMANO CN-M6100 (122 articles)
|
Cranks |
SHIMANO E6100 (36T) - length 170 mm
|
Brakes |
Shimano Deore (021) MT410 Hydraulic Disc
|
Brake levers |
Shimano Deore (021) BL-M4100
|
Brake discs |
front 180 mm / rear 180 mm
|
Rims |
KLS Valor 3 Disc 622x30 (32 holes)
|
Hubs |
SHIMANO MT400-B / Deore MT410-B Disc Center Lock (15x110 mm / 12x148 mm / 32 holes)
|
Spokes |
stainless steel black
|
Tires |
Schwalbe Nobby Nic Performance 60-622 (29x2.35) ADDIX
|
Seat post |
EXAform JAG1 Remote Telescopic - diam 30.9 mm / length 485 mm, stroke 150 mm
|
Saddle |
Selle Royal Vivo
|
Stem |
KLS Active - diam 28.6 mm / bar bore 31.8 mm / 6° / length 80 mm
|
Handlebars |
KLS Active RiseBar - diam 31.8 mm / rise 18 mm / width 720 mm
|
Grips |
KLS Poison OneLockon
|
Headset |
FSA 1.5 semi-integrated
|
Pedals |
plastic
|
Sex | Men, Unisex |
Model year | 2021 |
Gears | 1x12 |
Groupset | Shimano SLX, Shimano Deore |
Colour | grey |
Material | aluminium |
Wheel diameter | 29" |
Drive | Shimano STePS E7000 |
Battery | 720 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 120 mm |
Telescopic seat post | yes |
product ID | 124625 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews