Kellys Tayen R50 Pink 27.5" 720Wh, S
Frame size: S
Motor: SHIMANO STEPS E7000, 36V
Cycle computer: SHIMANO SC-E5000 cycle computer with assist switch
Battery: KELLYS Re-Charge V10 Li-ion internal removable 720Wh / capacity 20Ah, powered by BMZ
Fork: ROCK SHOX 35 Silver RL (27.5) Boost, 120mm, Solo Air / Motion Control / Maxle Stealth 15mm thru axle Main composition: FSA 1.5 semi-integrated
Cranks: SHIMANO E6100 (34T) - length 170mm
Shifting: SHIMANO Deore SL-M4100-R Rapidfire Plus (I-Spec EV)
Changer: SHIMANO Deore M5120 (direct mount)
Number of gears: 10
Cassette pinion: SHIMANO CS-M4100-10 (11-46T)
Chain: KMC e10T (116 links)
Brakes: SHIMANO MT200 Hydraulic Disc
Brake discs: front 180mm / rear 180mm
Brake levers: SHIMANO BL-MT200
Hubs: SHIMANO MT400-B Disc Center Lock (15x110mm / 12x148mm / 32 holes)
Fixed axle: front ROCK SHOX Maxle Stealth 15x110mm / rear NOVATEC 12x148mm
Rims: KLS Valor 3 Disc 584x30 (32 holes)
String: stainless steel black
Tires: SCHWALBE Nobby Nic Performance 60-584 (27.5x2.35) ADDIX
Stem: KLS Alm/En 50 - diam 28.6mm / bar bore 31.8mm / length 45mm
Handlebars: KLS Active RiseBar - diam 31.8mm / rise 18mm / width 700mm
Grips: KLS Poison OneLockon
Seatpost: KLS Active - diam 30.9mm / length 350mm
Saddle: SELLE ROYAL Vivo
Pedals: plastic
Model year | 2021 |
Gears | 1x10 |
Material | aluminium |
Drive | Shimano STePS E7000 |
Battery | 720 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
product ID | 124584 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews