Kellys Tayen 10 Sky Blue 27.5" 630Wh, S
Engine: PANASONIC GX Ultimate, 90Nm, 36V
Shift unit: PANASONIC gear shifter button
Cycle computer: PANASONIC center LCD
Battery: KELLYS Re-Charge Li-ion internal 630Wh / capacity 17.5Ah
Fork: SR SUNTOUR XCM32 (27.5) Boost, 120mm, coil spring / 15mm thru axle
Main composition: FSA 1.5 semi-integrated
Cranks: SAMOX (34T) - length 170mm
Shifting: SHIMANO Altus SL-M2000 Rapidfire Plus
Changer: SHIMANO Altus M2000 (direct mount)
Number of gears: 9
Cassette pinion: SHIMANO CS-HG400-9 (11-36T)
Chain: KMC e9S (118 links)
Brakes: SHIMANO MT200 Hydraulic Disc
Brake discs: front 180mm / rear 180mm
Brake levers: SHIMANO BL-MT200
Hubs: SHIMANO MT400-B Disc Center Lock (32 holes)
Fixed axle: front SR SUNTOUR 15x110mm / rear NOVATEC 12x148mm
Rims: KLS Draft Disc 584x21 (32 holes)
String: stainless steel black
Tyres: MICHELIN Country Racer 54x584 (27.5x2.10)
Stem: KLS Alm/En 50 - diam 28.6mm / bar bore 31.8mm / length 45mm
Handlebars: KLS Active RiseBar - diam 31.8mm / rise 18mm / width 700mm
Grips: KLS Token Lockon 3Density
Seatpost: KLS Active - diam 30.9mm / length 350mm
Saddle: SELLE ROYAL Vivo
Pedals: plastic
Model year | 2021 |
Gears | 1x9 |
Material | aluminium |
Drive | Panasonic GX Ultimate |
Battery | 630 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
product ID | 124581 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews