Focus Jarifa2 29 6.7 2019 gray electric bike
Mountain electric bike with aluminum frame, integrated battery, central drive, air lockable fork, on 29 "wheels.
Wheel size: 29
Frame: 6061 aluminum, 148x12 mm through axle, inner Bowden cable, post mount 180 mm
Fork: RST Alpha MLC, 100x15mm, 100mm travel
Motor: Bosch Active Line Plus, 36 V / 250 W
Battery type: Bosch PowerTube Li-Ion 36 V
Display: Bosch Purion, LCD display
Cranks: FSA CK-200
Gear levers: Shimano MT200
Cassette: Shimano HG500, 11-42T
Derailleur: Shimano Deore 6000, 10-speed
Rims: Rodi Tryp 25
Ammunition : Novatec
Pedals: MTB, Flat, Aluminum
Brakes: Magura MT4
Stem: BBB, aluminum, 65mm
Handlebars: BBB, aluminum, flatbar, 720mm, rise: 0mm, backsweep: 9degree
Brake levers: Shimano MT200
Tires: Schwalbe Smart Sam Performance 2.8
Saddle: Focus Sport Saddle
Seatpost: BBB-BSP-20, 31.6 mm, 350 mm
Color: gray
Model year | 2019 |
Gears | 1x10 |
Material | aluminium |
Drive | Bosch Active Line |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 86587 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews