Fuji E-Traverse 1.3 ST + Satin Lime Green / White, model 2019
Fork: Suntour NEX disc, hydraulic lockout, 700C coil, travel: 63mm, steel steerer
Cranks: Fuji aluminum forged crank arms for Bosch drive unit gen.3, 42T sprocket
Pedals: Polished aluminum body, Kraton grip, chromoly axle
Derailleur: Shimano Deore RD-M592 Shadow, 9-speed
Shifting: Shimano Altus 9-speed
Cassette: Shimano Acera HG200-9, 11-34T, 9-speed
Chain: KMC e9S w/ MissingLink, 9-speed
Wheels: Fuji 6 bolt disc QR front, Fuji 6 bolt disc QR rear, 36H hubs, 14g stainless steel spokes, Vera Terra DPD22 aluminum double-wall rims with stainless eyelets
Tires: Vera EOS 700 x 38c, Phalanx puncture protection, reflective stripe
Brakes: Tektro HD-M285 hydraulic disc, rotors: 160mm front, 160mm rear
Brake levers: Tektro HD-M285 hydraulic disc, 3-finger lever
Head composition: 1 1/8"", Zero Stack, sealed
Handlebars: Oval 200 riser bar, 6061 aluminum, 31.8, 620mm wide, 15mm rise, 9 degree sweep
Stem: Oval 313, 6061 aluminum, 31.8, 7 degree, ahead-style
Grips: Oval Concepts Comfort Single LO, single density Kraton
Saddle: Oval Concepts 300, steel rail
Seatpost: Oval Concepts 300, 6061 alloy micro adjust, 30.9mm diameter
Weight: 21.74 kg / 47.91 lbs
Motor: Bosch Active Plus mid-motor, 250W rated power, 25kph maximum assist
Battery: Bosch Power Pack 400Wh w/ charger
Display: Bosch Purion
Model year | 2019 |
Gears | 1x9 |
Groupset | Shimano Deore, Shimano Acera, Shimano Altus |
Material | aluminium |
Drive | Bosch Active Line |
Battery | 400 Wh |
Brakes | Hydraulic disc brakes |
product ID | 78129 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews