Mondraker Play 20 children's electric bike, black/marlin blue
Mondraker Play 20 (SPE) children's electric bike
| Drive |
Mahle-Ebikemotion X-35
|
| Battery |
Mahle-Ebikemotion Internal 250 Wh
|
| Frame |
Play 20 6061 Alloy Stealth evo, hydroformed tubing, integrated internal non-removable battery, Tapered head tube, HHG internal cable routing, BSA bottom bracket, QR 9 mm rear axle, 1x drivetrain compatible
|
| Fork |
MDK 20 Kid, Rigid alloy Stealth stanchions, Post Mount disc brake mount
|
| Shifting |
Microshift Mezzo TS39-9, 9s
|
| Derailleur |
Microshift M26S, 9s, short cage
|
| Cassette |
Microshift Mezzo 11-34T, 9s
|
| Chain |
Sram PC951 9s, Powerlock
|
| Crankset |
Prowheel, Direct mount chain ring, 114 mm
|
| Brakes |
Shimano M6100, servo wave, alloy lever, tooled reach adjust
|
| Rims |
MDK-XP1 20 TLR, 25mm internal width, tubeless ready, 32 spokes
|
| Front hub |
Formula DC20LW, 9x100mm, cup & cone ball bearings, IS 6 bolts
|
| Rear hub |
Mahle-Ebikemotion X-35
|
| Tires |
Kenda Booster 20x2.4 single compound 30 TPI, wire bead, Kenda Booster 20x2.4 single compound 30 TPI, wire bead
|
| Seat post |
MDK XC 0-R, 6061 T6 Alloy, diameter 31.6 mm, length 250 mm
|
| Saddle |
SDG Fly JR
|
| Stem |
Onoff Sulfur FG 30 mm 0º, 6061 forged alloy, 31.8 mm barbore
|
| Handlebars |
MDK XC 1.0, 6061 alloy, rise: 25 mm, width: 580 mm, 9º backsweep, 5º upsweep, 31.8 mm barbore
|
| Headset |
Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
|
| Bottom bracket |
Prowheel BSA, 73mm
|
| Model year | 2022 |
| Gears | 1x9 |
| Size | uni |
| Child's height | 120-135 cm |
| Material | aluminium |
| Wheel diameter | 20" |
| Drive | Mahle X35 |
| Battery | 250 Wh |
| Brakes | Hydraulic disc brakes |
| Fork | Rigid |
| product ID | 191906 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews