FOR KORYAK E-PEFORMANCE stem, Ø-35 mm
AL-6061 aluminum stem with “headlock” clamping.
Suitable for use on AM and XC, specially optimized for E-MTB.
3D forged construction.
Tone-on-tone design.
Inclination: 0°
Fork neck: 1-1/8" (28.6 mm)
Handlebars: 35 mm
Weight: from 160g
| Colour | black |
| Handlebar diameter | 35 mm |
| Stem inclination (+/-) | 0° |
| product ID | 212282 |
Failure to follow instructions may result in serious injury.After an accident / impact, replace the product and all related parts.If mounting on a 1" fork steerer, use the appropriate shim.Never apply grease to the clamping surfaces.Never use a tightening torque higher than that indicated on the product.Do not use this product in any category other than that indicated on the packaging (e.g. trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).Do not use extensions with a tightening torque higher than the recommended value of 5 Nm.If you are in doubt as to whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor, or visit our website www.pro-bikegear.com.IMPORTANT!Carefully read the manufacturer's instructions for all additional components (brake levers, shift levers, extensions, etc.).Regularly check that the screws are tightened to the specified value.Required tools:Allen key, torque wrench and sandpaperIMPORTANT!If the stem has 4 screws: always tighten alternately in a cross pattern.If there are additional instructions between the body and the front of the stem - follow them carefully.Stem angle (for adjustable stem only):Adjust the angle.Tighten to the torque value indicated on the stem.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews