Shimano flashlight holder STEPS BTE8016 for frame without lock with cable 600mm black

WARNING
Information on product installation, adjustment, and replacement not found in the user's manual can be obtained at the place of purchase or from a distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this “user's manual” thoroughly before use, follow it for proper use, and store it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to equipment and surroundings. Instructions are classified according to the degree of danger or damage that may occur in case of improper use of the product.
DANGER - Failure to follow instructions will result in death or serious injury.
WARNING - Failure to follow instructions could result in death or serious injury.
CAUTION - Failure to follow instructions could result in personal injury or physical damage to equipment and surroundings.

DANGER
Battery handling
- When charging, use the specified battery charger and follow the specified charging conditions. Otherwise, overheating, rupture, or ignition may occur.
- Do not leave the battery near heat sources, such as heaters. Otherwise, it may rupture or ignite.
- Do not heat the battery or throw it into fire. Otherwise, it may rupture or ignite.
- Do not deform, modify, or disassemble the battery; also, do not directly apply solder to the battery terminals. Otherwise, liquid may leak from it, it may overheat, rupture, or ignite.
- Do not connect the terminals with metal objects. Otherwise, they may short circuit or overheat, resulting in burns or other injuries.
- Do not carry or store the battery with metal objects, such as chains or hairpins. Otherwise, a short circuit or overheating may occur, resulting in burns or other injuries.
- Do not immerse the battery in fresh or salt water and prevent the battery terminals from getting wet. Otherwise, overheating, rupture, or ignition may occur.
- Do not expose the battery to strong impact or throw it. Otherwise, overheating, rupture, or ignition may occur.
- In case of battery fire, the following must be observed:
If possible, carefully keep other batteries away from the fire.
Evacuate all persons from the immediate area of the fire.
Extinguish the fire with a large amount of cold water (at least 10 battery blocks by weight).
Battery charger handling
- Do not disassemble or modify the battery charger. Failure to do so may result in electric shock or injury.
- For charging, use the specified battery and charger combination and follow the specified charging conditions. Charge only rechargeable batteries. Otherwise, overheating, rupture, or ignition may occur.
- If the battery is not fully charged even after 2 hours of charging beyond the specified charging time, immediately disconnect the battery from the power outlet and contact the place of purchase. Otherwise, overheating, rupture, or ignition may occur.
Refer to “Specified charging time.”
- Do not let the battery charger get wet. If it gets wet or water gets into it, ignition, overheating, or electric shock may occur.
- Do not use it when wet, and do not touch or hold it with wet hands. Electric shock may occur.
- Do not cover the battery charger with fabrics or other similar materials during use. Otherwise, heat accumulation, housing deformation, fire, ignition, or overheating may occur.
- Use the battery charger only at the specified supply voltage. If the supply voltage is other than the specified value, fire, explosion, smoke, overheating, electric shock, or burns may occur.
WARNING:
Battery handling
- Use the product under the supervision of a person responsible for safety and only according to instructions. Do not allow anyone (including children) with reduced physical, sensory, or mental capabilities or persons without experience or knowledge to use the product. Do not allow children to play near the product.
- Keep out of reach of children.
- If liquid leaking from the battery gets into the eyes, immediately rinse the affected area thoroughly with potable water (tap water) without rubbing the eyes and seek immediate medical attention. Failure to do so, the battery liquid may damage your eyes.
- If leaking liquid gets on your skin or clothing, immediately clean them with clean water (clean for at least 15 minutes). Leaking liquid may damage your skin.
- Medical attention is required for symptoms caused by accidental ingestion of battery liquid, skin or eye contact, or inhalation of battery combustion products.
- After accidental inhalation of vapors or fumes, immediately go to a place with fresh air, stay warm and quiet, and seek professional medical attention if necessary.
- Do not use the battery outside the specified operating temperature range. If the battery is used or stored at temperatures outside these ranges, fire, battery damage, or operational problems may occur.
1. During discharge: -10 – 50 °C
2. During charging: 0 – 40 °C
Temperatures above 60 °C can cause battery leakage and rupture.
- Do not use the battery if there are visible scratches or other external damage. Failure to do so may result in rupture, overheating, or operational problems.
- Do not use products with a broken seal. Immediately hand them over for proper recycling. (Screw heads on the housing are sealed with adhesive or a cover.)
- Do not use the battery if it shows liquid leakage, discoloration, deformation, or other unusual signs. Failure to do so may result in rupture, overheating, or operational problems.
- Batteries must not come into contact with solvents (i.e., thinners, alcohol, oil, or anti-corrosion agents) or chemicals that affect the surface (i.e., cleaning agents).
Battery charger handling
- When connecting or disconnecting the cable, hold it by the power plug. Failure to do so may result in fire or electric shock.
- If the following symptoms occur, stop using the device and contact the place of purchase. Fire or electric shock may occur.
If pungent smoke comes from the power plug or the plug gets hot.
There is a poor connection inside the power plug.
- During a lightning storm, do not touch the metal parts of the power plug or AC adapter. Electric shock may occur if struck by lightning.
- Do not overload the power outlet with appliances exceeding the rated capacity of the outlet, and use only an AC power outlet of 100 – 240 V AC. Overloading the power outlet by connecting a large number of appliances using adapters can lead to overheating, resulting in fire.
- Do not damage the power cord or power plug. (Do not damage them, modify them, forcibly bend them, twist them, or stretch them; do not place them near hot objects, place heavy objects on them, or tightly bundle them together.) If used in a damaged state, fire, electric shock, or a short circuit may occur.
- Do not use the battery charger in conjunction with commercially available electrical transformers designed for use abroad (travel converters). This may cause damage to the battery charger.
- Always insert the power plug all the way in. Failure to do so may result in fire.
- If the plug is wet, do not insert or remove it. Otherwise, electric shock may occur. If water leaks from the plug, dry it thoroughly before inserting it.
- Do not charge the battery in wet places or areas with high humidity. (EC-E8004) Do not charge the battery in wet places, areas with high humidity, or outdoors. (Other battery charger than EC-E8004) Fire, ignition, overheating, or electric shock may occur.
- Do not move the bicycle while charging the battery installed on the bicycle. The power plug of the battery charger may become loose and not fully inserted into the power outlet, posing a risk of fire.

CAUTION
Battery handling
- Do not leave the battery in direct sunlight, inside a vehicle on a hot day, or in other hot places. This may result in liquid leakage from the battery.
- Avoid large temperature changes.
- Do not store this product near open flames and food.
- Store the battery in a dry place.
- Handle components with both hands. Otherwise, components may fall and break or cause injury.
- If an error occurs during battery charging or discharging, immediately stop using it and refer to the user's manual. If you are unsure, contact the place of purchase or a distributor.
- Do not touch the battery for an extended period when it is hot. This may cause low-temperature burns. Riding with a high level of assistance on hot days or charging the battery in direct sunlight can cause the battery surface temperature to exceed 60 °C (BT-E8036).
Battery charger handling
- Regularly inspect the battery charger and adapter; pay particular attention to damage to the cable, plug, and casing. If the charger or adapter is damaged, do not use them until repaired at the place of purchase or by a distributor.
- Use the product under the supervision of a person responsible for safety and only after receiving instructions on use. Do not allow persons with reduced physical, sensory, or mental capabilities, inexperienced persons, or persons without the required knowledge to use the product. Do not allow children to play near the product.
- When cleaning, unplug the power plug from the power outlet and the charging plug from the battery. Failure to do so may result in electric shock.
- Do not touch the battery charger when it is hot. This may cause burns.
- When the battery charger temperature has increased, do not touch it for an extended period. This may cause low-temperature burns.
- The product temperature can reach 40 to 70 °C during charging. However, this is normal.
- Before using the battery charger, read all instructions and warning signs on the battery charger, battery, and the product using the battery