FOX Transfer Factory dropper seatpost, Ø-31.6 mm, 411 mm/150 mm
FOX Transfer Factory Dropper Post
The "Factory" designation says it all. Our best technology is available in our Factory Series models, including our ultra-durable Kashima Coat genuine finish for buttery smooth performance. The FOX Transfer 2025 dropper post features a completely redesigned internals, making it smoother and more robust than ever before. With easier lever actuation, improved serviceability, and greater adjustability, it gains an edge over the competition. The travel is now adjustable in 5mm increments and available up to 240mm. The completely redesigned 2025 Transfer internals feature an all-new seal system that increases durability. The full service interval is now 300 hours, which most riders can handle with tools in their garage. EKONOL (PTFE/Teflon) bushings with a metal backing are also used to achieve tight tolerances and the lowest possible friction, allowing for easier actuation. The new air chamber placement allows riders to inflate and adjust air pressure via an auto-valve located under the seat clamp. Fine-tune your preferred return speed or adapt it to environmental factors like altitude or ambient temperature. A metal valve cap with an O-ring (the same we use on FOX suspension) ensures zero air loss through the valve. The same head height and two-bolt design that riders loved on the previous Transfer model have been retained, while improving aesthetics and minimizing weight. With 120-240mm of travel, adjustable travel (in 25mm increments, 5mm at a time), the Transfer reclaims its rightful place as the leader in dropper seatposts.Note: The package does not include a remote lever. It must be purchased separately. FOX manufacturer levers can be found at this link.
|
Possibility of smooth control of retraction and extension with a lever from the handlebars
|
|
Internal routing of the remote control cable
|
|
Piston rod surface finish - Kashima Coat
|
| Colour | black |
| Diameter | 31.6 mm |
| Dropper post travel | 150 mm |
| Control | internal cable routing |
| Offset | 0 mm |
| Total length | 411 mm + 28 mm cable attachment |
| Max insertion into the frame | 224 mm + 28 mm cable attachment |
| Weight | 549 g |
| Warning | The package does not include a control lever. It must be purchased separately. |
| Model year | 2025 |
| product ID | 289713 |
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Variant FOX Transfer Factory teleskopická sedlovka, Ø-31.6 mm, 411 mm/150 mm
Sedlovku opravili vrámci reklamácie, už drží polohu, takže spokojnosť.
Translate by GoogleShow the originalSedlovka by bola výborná, avšak pozorujem niečo, čo som u sedlovky tejto značky a v tejto cene nečakal. Po chvíli jazdy v sedle v hornej polohe trošku klesne. Keď vstanem zo sedla a stlačím páčku, tak znovu klopne ako sa opäť vráti do svojej maximálnej hornej polohy. Nemám to zatiaľ presne zmerané o koľko klesne po akom čase, budem to ďalej sledovať, ale nie je to v poriadku, keď neudrží ani moju váhu čo je menej ako 80kg.
Variant FOX Transfer Factory teleskopická sedlovka, Ø-31.6 mm, 411 mm/150 mm
Funguje dobre ale predchádzajúca sedlovka čo sam jazdil pri vystrelení hore dala vždy zvukový efekt tuknutia na doraz čo tato nerobí a tým pádom mám podvedome pocit že nie je úplne vysunutá...
Translate by GoogleShow the original
Ahoj, moja sedlovka výrazne klopne po vysunutí na doraz, hlavne keď razantne stlačím páčku a aj samotný Fox sa s tým chváli na videu, že ako to hlasno klope, takže to tipujem na nejakú menšiu vadu.
Translate by GoogleShow the original