PRO LT OS Al adjustable stem
Suitable for use on the road, trekking or MTB.| Colour | black |
| Stem length | 90 mm, 110 mm |
| Handlebar diameter | 31.8 mm |
| Stem inclination (+/-) | adjustable |
| Slope | -30° - +40° |
| Weight | from 255 g |
| product ID | 37565 |
Dobry den,
Sklon predstavca sa da nastavovat "jemne" po jednotlivych stupnoch, alebo su tam skoky napr 5 stupnov (ako je na stupnici)?
Dakujem.
Dobrý deň,
Kontaktovali sme dodávateľa.
Dobrý deň,
obdržali sme odpoveď od dodávateľa: stupnica je po 2.5 stupna ale preradit je mozne len po desiatich stupnoch.
Dobrý deň,
v akej dĺžke máte tento predstavec, len v 110 mm? a akú má výšku vidlicovej svorky? ďakujem
Dobrý deň,
áno tento model je dostupný len v jednej dĺžke - 110mm. Výška svorky bude štandardná ako u všetkých predstavcov, nevieme ju ale reálne zmerať, nakoľko predstavec nemáme na predajni.
Failure to follow instructions may result in serious injury.
Replace the product after a fall / impact.
Only use the shims supplied with the product to reduce the fork steerer diameter.
Never use grease on bolts or clamping surfaces.
Always use the recommended torque specified in the installation instructions or on the product.
Do not use this product in a category other than that for which it is intended (e.g. road racing or MTB).
Do not use MTB handlebars in combination with extensions.
Do not use extensions that exceed the recommended torque of 6 Nm.
Important:
Carefully read the manufacturer's instructions for any additional components (such as brake lever, shift lever, etc.) before using them on the product.
Regularly check that the bolts are still tightened to specification.
Refer to the installation instructions supplied with the product for correct assembly information.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Spokojný funguje dobre
Translate by GoogleShow the original
dobrý je to
Translate by GoogleShow the original
Predstavec ako taký je fajn len hneď pri prvom montovaní a nastavovaní sa mi vymlel 6 hran v štifte (inbus) lebo ešte som ani nemal zovreté kliešte a už som to musel uťahovať nad rámec sily a štift sa nedá nikde kúpiť samostatne. Po rozobratí som zistil že jeden zo závitov na štifte je zlý a rozbil aj závit v kliešťach. Tak som to zafixoval lakom na nechty a hodil tam dlhú skrutku skrz kliešte. Neodporúčam kúpu tohto predstavca len ak Vám nebude vadiť že Vám z neho bude trčať skrutka s matkou. Neviem či je to častá chyba ale pri výrobku za 31€ by sa to stávať nemalo.
Translate by GoogleShow the original