Localisation
Form is being processed

Shimano Shear XT M8025 2x11 uni move Down Swing (34.9 / 31.8 / 28.6mm) 38z.

63.99 
These goods are unavailable
heart_plusAdd it to your wishlist and we will inform you, when it will be available, or see other products in the category:
MTB front derailleurs MTB front derailleurs (Shimano)
You can try these searches
shopping_cart
more than 20 customers
have already purchased this product

Compatible with traditional mounting standards in 4 standards. The XT FD-M8025 shifts your 2x crankset with authority and precision.
Debuting on XTR M9000, the light and crisp shift action of the DEORE XT SIDE SWING front derailleur (FD-M8020 2x11 or FD-M8000 3x11 option) has been designed with long travel trail bikes in mind. Both M8000 derailleurs bring a drastic reduction in shift effort with efficient cable routing and enhanced stability, while also increasing tire clearance allowing for shorter chainstays. High clamp, low clamp, D-type and E-type mounting options are available. In addition, the 2x10 front derailleur FD-M8025 are available as well in a TOP SWING or downswing execution.


Dyna-Sys11 
The real advantage of 11-speed is the ability to have all the range you require without sacrificing the rhythm you need. 

Features

  • Super light shift action
  • 2x mounting options: High clamp, Low clamp, D-type, E-type (without plate)
  • Designed with long travel trail bikes in mind
  • 2x11-speed crank only

Product features

  • Use: MTB
  • Group: XT
  • Model: FD-M8025-H
  • Mounting: High Clamp
  • Multi-Clamp: 34.9 mm (28.6 mm / 31.8 mm w/ Adapter)
  • Cable route type: Dual Pull            
  • Gear front: 2-speed
  • Gear rear: 11-speed
  • Top gear teeth: 34-38T
  • Total capacity: 10T
  • Compatible Chain: HG-X 11-speed
  • Chain stay angle: 66-69°
  • Chain line: 48.8mm

Material

  • Aluminum
  • Steel

Weight

  • 149g

Scope of delivery

  • XT 2x11 Front Derailleur FD-M8025 High Down-Swing
Product details
Groupset Other
Gears 2x11
Control type mechanical
product ID 40750

Product rating  (0 ratings)
0/5
(0 ratings)
(0 ratings)
(0 ratings)
(0 ratings)
(0 ratings)
(0 ratings)

How do you rate the product?
Add a review
Help others, earn points and shop better prices thanks to the loyalty program
Product questions
thumb_up0thumb_down

SK Dobrý deň,

vymieňam starý FD-M611 prešmykač (lanko vedený zhora) a prechádzam z 3x10 na 2x11. Rád by som sa spýtal, či z Vašej ponuky mi bude dobrý iba tento XT, alebo bude dobrý niečo aj z radu SLX čo máte v ponuke (nie staršia ako M7000)? Resp. či existuje adaptér s objímkou pre montáž Direct mount prešmykačov? Ďakujem za pomoc.

Translate by GoogleShow the original
thumb_up0thumb_down
thumb_up0thumb_down

SK Dobrý deň, nemá vám prečo tento prešmyk nesedieť: Technológia Dual-Pull umožňuje univerzálny pohyb lanka a to zhora a aj zdola. Malo by to byť úplne ok.

Translate by GoogleShow the original
thumb_up0thumb_down
thumb_up0thumb_down

SK Dobry den, chcem vas poziadat o info, ci dany presmykac bude vhodny pre kluky "Shimano XT FC-M8000-2 kľuky 38/28 zubov 175 mm 2x11 sp". (Planujem upgrade mojho bike na 11 sp.)

Za skoru odpoved vam vopred dakujem.

Translate by GoogleShow the original
thumb_up0thumb_down
thumb_up0thumb_down

SK Dobrý deň,

pokiaľ Vám vyhovuje uchytenie prešmyku, tak áno, pre dané kľuky bude vhodný.

Translate by GoogleShow the original
thumb_up0thumb_down
thumb_up0thumb_down

SK Dobry den,mozete mi potvrdit ze tento presmykac je vhodny na 2x11 [36z/26z]. Tah je zospodu,bez uchytenia bowdenu,priamo lanko na skrutku?Vdaka

Translate by GoogleShow the original
thumb_up0thumb_down
thumb_up0thumb_down

SK Dobrý deň,
ospravedlňujeme sa za neskorú reakciu. Prešmykač je určený pre systém 2x11, ťah lanka je univerzálny.

Translate by GoogleShow the original
thumb_up0thumb_down
thumb_up0thumb_down

SK zdravim, bude mi pasovat na 2x10 na 38/26 z.? Mam Shimano Deore FD-M6025-H, ale nejako mi blbne a neviem najst inu adekvatnu nahradu.
Vdaka

Translate by GoogleShow the original
thumb_up0thumb_down
thumb_up0thumb_down

SK Dobrý deň,

tento prešmyk má kapacitu 10 z. - t.j. jeho použitie na kombináciu prevodníkov 38-26 z. je už trochu hraničné - každopádne pri precíznom nastavení to ešte možno môže fungovať bez nežiaduceho kontaktu reťaze s klietkou prešmyku.. Rovnakú kapacitu má aj Vaša terajšia M6025ka..

Žiadny prešmykač s montážou na objímku pre 2x11 systémy s vyššou kapacitou žiaľ aktuálne dostupný nie je.

Translate by GoogleShow the original
thumb_up0thumb_down
thumb_up0thumb_down

SK zdravicko.bude mi pasovat na 3x11?

Translate by GoogleShow the original
thumb_up0thumb_down
thumb_up0thumb_down

SK Dobrý deň,

Prešmyk je určený pre 2x11. Pre aký rozsah prevodníkov prešmyk potrebujete?

Translate by GoogleShow the original
thumb_up0thumb_down
Form is being processed
Japanese manufacturer produces road, mountain, gravel, trekking, BMX and e-bike groupsets. They also offer a whole series of components and apparel. Their range goes from wheels, footwear, eyewear to backpacks. Shimano is a traditional manufacturer known for their quality work, which is why they are the favourite choice of amateurs and professionals.

All the answers to questions about delivery, payment, security, returns, warranty and much else.

You may find these products complementary
Why shop with us?
Find out what makes us special
1 500 000+ orders

We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.

Unique customer service

We are available via e-mail, online chat, phone or in person at our MTBIKER stores.

We actively support the cycling community in Slovakia

Thanks to your order we can support cycling development.

Secure payment methods

The payment process is safe and we offer you a wide range of options.

Loyalty program

We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.

MTBIKER centre and showroom

Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.

navigate_beforeprevious navigate_nextďalší
keyboard_arrow_up