Wilier Cento1AIR 105 Disc, model 2020, red
Spliced wheels: Shimano RS170
Fork: Carbon Monocoque 46ton
Handlebars: FSA Omega
Stem: FSA OS-168 - Custom Wilier
Headstock : Ritchey Tapered 1"1/8 Top - 1"1/4 Bottom
Shifting: Shimano 105 R7020 DISC
Brakes: Shimano 105 R7000
Discs: Shimano 140 mm rear / 160 mm front
Front derailleur: Shimano 105 FD-R7000 11S
Rear derailleur: Shimano 105 RD-R7000 11S
Cranks: Shimano 105, 11S R7000 11/30T
Center composition: Shimano 105 Press Fit
Cassette: Shimano 105, 11S R7000 11/30T
Chain: Shimano 105, 11S
Tires : Vittoria Zaffiro Pro 4 700x25 mm
Saddle: Selle Italia X3 Boost
Seatpost : Cento1air Custom Made by Ritchey
Total weight: 8.5 kg +/- 5%
Frame weight: 1120 g +/- 5%
Fork weight: 390 g ± 5%
Note: This is an illustrative image.
Model year | 2020 |
Gears | 2x11 |
Groupset | Shimano 105 |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 103355 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews