Pinarello Dogma F12 Disk 28 bicycle, limited edition - test model
Bike fitting discount 100 % (you will save 180 €) Free
The F12 model is the highest model of the Italian brand. Compared to its predecessor, the aerodynamics have been improved, which generates savings of up to 8 watts at 40 km/h. This is helped by the frame and fork, an improvement of 7.3% and the new Talon Ultra carbon handlebar, an improvement of 5%. They are also 10% lighter and 8% stiffer. The frame with the same weight is stiffer and the twist has been reduced by 10%. The new Onda fork, including the ForkFlap aero end, is up to 40% stiffer, which especially benefits the disc version. The frame comes in up to 13 sizes, the Talon Ultra handlebars in 16 sizes, a total of up to 208 possible combinations.
Bike ridden by our editor Cep. The bike was completely rebuilt with a new set of Shimano Ultegra DI2 12sp, compared to the basic equipment, the bike also has carbon wheels, a 4iiii wattmeter, a Kogel ceramic center and a computer holder. Very good condition with minimal signs of use.
Frame: Torayca 1100 1K
Fork: Onda Pinarello F12 ForkFlap
Wheels: Fast Forward Tyro
Cranks: Shimano Ultegra FC-R8100 50/34T
Wattmeter: 4iii Shimano Ultegra R8100 Precision 3D GEN3
Cassette: Shimano Ultegra R8100 11-30t
Shifting: Shimano Ultegra ST-R80150 Di2
Derailleur: Shimano Ultegra FD-R8150 Di2
Derailleur: Shimano Ultegra RD-R8150 Di2
Chain: Shimano hg-701
Brakes: hydraulic Shimano Ultegra BR-R8170
Tires: Pirelli P Zero Velo
Stem and handlebars: XA Aero AL bridge
Saddle: Lynx bridge
Seat post: Pinarello Aero carbon
Warranty: 12 months
| Model year | 2020 |
| Gears | 2x12 |
| Groupset | Shimano Ultegra |
| Material | carbon fiber |
| Brakes | Hydraulic disc brakes |
| product ID | 102876 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews