Lapierre Sensium 3.0 Disc bicycle, red
Lapierre Sensium 3.0 Disc bike
Frame |
SENSIUM AL SUPREME 5 ALLOY DISC SMOOTH WELDINGS
|
Fork |
SENSIUM AL DISC CARBON / ALLOY steerer
|
Derailleur |
SHIMANO TIAGRA RD-R4700GS, 10s
|
Cassette |
SHIMANO HG500 10s 11-34T
|
Chain |
SHIMANO TIAGRA ST4720 / BR4770 DISC 2x10s FLAT MOUNT
|
Cranks |
SHIMANO TIAGRA FC-R4700, 50X34T 170 mm (XS, S) 172.5 mm (M), 175 mm (L, XL, XXL)
|
Brakes |
SHIMANO RT70SS 140mm centerlock
|
Seat post |
Lapierre ALLOY 27.2 x 350 mm
|
Saddle |
Selle Italia X3 Boost
|
Stem |
Lapierre ALLOY -7 ° 31.8 mm, 80 mm (XS, S), 90 mm (M), 100 mm (L), 110 mm (XL), 120 mm (XXL)
|
Handlebars |
Lapierre ALLOY 40 cm (XS, S) 42 cm (M, L) 44 cm (XL, XXL)
|
Grips |
LAPIERRE TAPE
|
Headset |
FSA No.9 / TH 1-1 / 8", 36 ° / 36 ° ACB
|
Bottom bracket |
SHIMANO BB-RS500
|
Pedals |
VP-335 Clips & Straps
|
Derailleur |
SHIMANO TIAGRA FD-R4700BM
|
Front braided wheel |
RYDE DP19
|
Rear braided wheel |
SHIMANO MT200 Centerlock 32H
|
Sex | Men, Unisex |
Model year | 2021 |
Gears | 2x10 |
Groupset | Shimano Tiagra |
Size | XS, S, M, L, XL, XXL |
Colour | red |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 122416 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
