Kellys ARC 50, model 2021
Bike fitting discount 20 % (you will save 28 €)
fork KELLYS Carbon Disc - 1.5 tapered steerer, post mount disc brake
main composition FSA 1.5 semi-integrated
middle composition SHIMANO BB-RS500
handles SHIMANO RS510 compact (50x34T) - length 172.5mm (S - M), 175mm (L)
shifting SHIMANO 105 ST-R7000 Dual Control
derailleur SHIMANO 105 R7000 (braze on)
SHIMANO 105 R7000 inverter (direct mount)
number of transfers 22
cassette pinion SHIMANO CS-R7000-11 (11-32T)
chain KMC X11 EL (108 links)
brakes TEKTRO Spyre Mechanical Disc
brake discs front 160mm / rear 160mm
brake levers SHIMANO 105 ST-R7000 Dual Control
NOVATEC Disc hubs (28 holes)
rims KELLYS Spark 622x15 (28 holes / riveted)
string stainless steel black
tires SCHWALBE Lugano K-Guard 25-622 (700x25C)
stem KLS Active Road - diam 28.6mm / bar bore 31.8mm / 6 ° / length 90mm (S), 100mm (M), 110mm (L)
KLS Active Road handlebars - diam 31.8mm / width 400m (S), 420mm (M), 440mm (L) handles KLS bar tape
seatpost KLS Active - diam 30.9mm / length 350mm (S - M), 400mm (L)
saddle KLS SlipStream cr-mo rails
| Model year | 2021 |
| Gears | 2x11 |
| Groupset | Shimano 105 |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 113465 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
dobry den
bude velky problem v buducnosti vymenit tie mechanicke brzdy za hydraulicke?
samozrejme v servise, ja sa toho chytat nebudem
Dobrý deň,
Nie je problém, len bude potrebné zakúpiť komplet radenie s hydraulickými brzdami.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews