Giant Propel Advanced 1 Disc, model 2020
Gunmetal Black / Chrome color
Advanced Composite frame, AeroSystem Shaping technology
Advanced Composite fork, OverDrive post, 12mm fixed axis
Giant Contact SL Aero handlebars
Stem Giant Contact SL Aero
Giant Vector seatpost, carbon
Saddle Giant Contact (Forward)
Shimano Ultegra
Shimano derailleur
Shimano derailleur
Shimano brakes, hydraulic
Shimano brake levers
Shimano cassette, 11-30 teeth
KMC X11EL-1 chain
Shimano cranks, 52/36 teeth
Middle composition Shimano, press fit
Giant SLR 1 Aero Disc Composite WheelSystem rims, carbon rims 42/65 mm
Giant SLR 1 Aero Disc WheelSystem, 12mm fixed axles
Giant SLR 1 Aero Disc WheelSystem wires
Tires Giant Gavia Course AC 1, 700x25, spiritless
Model year | 2020 |
Gears | 2x11 |
Groupset | Shimano Ultegra |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 93489 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews