Fuji Transonic Disc 2.5 Satin Red, model 2020
Bike fitting discount 20 % (you will save 28 €)
Fork: FC-440 carbon monocoque with tapered carbon steerer, 12mm thru-axle dropout with flat-mount disc system
Cranks: Oval Concepts 300, forged 6066 arms, M24 spindle, forged praxis 52 / 36t rings
Middle composition: Praxis PF30 conversion bottom bracket
Derailleur: Shimano 105, braze-on mount
Derailleur: Shimano 105
Gear: Shimano 105 Dual Control Hydraulic, 2x11-speed
Cassette: Shimano 105, 11-30T
Chain: KMC X11 with MissingLink
Wheels: Oval Concepts 324 Disc, centerlock hubs, 100x12mm & 142x12mm thru Axles, 700c 24 / 28H rims
Tires: Vittoria Zaffiro Pro, 700x25c, 60 tpi, folding
Brakes: Shimano 105 Hydraulic, 160mm rotors
Brake levers: Shimano 105 Hydraulic
Head assembly: FSA Integrated 1 1/4 "upper - 1 1/2" lower sealed bearing
Handlebars: Oval Concepts 790 Aero Aluminum, 31.8mm clamp, 125mm drop, 75mm reach
Stem: Oval Concepts 790 Aero, 3D-forged, -17 with integrated computer mount
Grips: Anti-Slip Silicone
Saddle: Oval Concepts 438, steel rail
Seatpost: Oval Concepts Transonic Aero, 300mm 46-52cm / 350mm 54-61cm
Weight 9.01 kg
| Model year | 2020 |
| Gears | 2x11 |
| Groupset | Shimano 105 |
| Material | carbon fiber |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 78214 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Zdravím.Akú veľkosť tohto bicykla potrebujem ,keď meriam 178 cm a dĺžka vnútornej strany nohy je 81 cm,M alebo L.unesie ma tento bicykel keď vážim 100 kg? Za odpoveď Vám ďakujem.
Dobrý deň,
Odporúčame skôr veľkosť M. U L by ste boli na spodnej hranici veľkosti a nebolo by to ideálne. S nosnosťou nebude problém.
Zdrav´m.
Do akej kategórie patrí tento bike? Do kategórie Racing,Endurance alebo inej.Je tento bike vhodný aj pre hoby jazdca ako som ja?
Dobrý deň,
Bicykel je z "racing" kategórie ale je vhodný aj pre hobby jazdcov.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews