Fuji TRANSONIC 2.3 D, model 2021, red-grey
Bike fitting discount 20 % (you will save 28 €)
Fork: C10 carbon monocoque, tapered carbon steerer, 100x12mm thru-axle
Cranks: Shimano 105, 50/34T
Center composition: Praxis PF30 conversion bottom bracket
Derailleur: Shimano 105
Derailleur: Shimano 105
Shifting: Shimano 105 Dual Control, 2 x 11-speed
Cassette: Shimano 105, 11-30T
Chain: KMC X11EL
Wheels: Oval Concepts 524 Disc, 24/28H tubeless compatible rims
Tires: Vittoria Zaffiro Pro V, G2.0, 28-622, 26tpi, folding
Brakes: Shimano 105, hydraulic disc
Brake levers: FSA, 1 1/4 upper - 1 1/2 lower, integrated
Headset: Oval Concepts 790 Aero aluminum, 31.8mm clamp, 125mm drop/ 75mm reach
Handlebars: Oval Concepts 790 Aero, 3D-forged, -17 degree, integrated computer mount
Stem: Anti-slip silicone
Grips: Oval Concepts X38 with pressure relief zone, chrome rails
Saddle: Oval Concepts Transonic Aero, 300mm 49-52cm/ 350mm 54-61cm
Seat post: 8.81 kg
| Model year | 2021 |
| Gears | 2x11 |
| Groupset | Shimano 105 |
| Material | carbon fiber |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 118830 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews