Fuji Transonic 2.1 RIM Satin Carbon / Red, model 2020
Fork: FC-440 full carbon with tapered carbon steerer
Cranks: Shimano Dura-Ace, 52 / 36T
Middle composition: Praxis PF30 conversion bottom bracket
Derailleur: Shimano Dura-Ace, braze-on mount
Derailleur: Shimano Dura-Ace, 11-speed
Gear: Shimano Dura-Ace, STI, 2x11-speed
Cassette: Shimano Dura-Ace, 11-30T, 11-speed
Chain: Shimano Dura-Ace, 11-speed with QuickLink
Wheels: Oval Concepts 950 F, 700c 18 / 24H aero carbon-alloy rims
Tires: Vittoria Rubino Pro, 700x25c, 150 tpi, folding
Brakes: Shimano Dura-Ace direct-mount
Brake levers: Shimano Dura-Ace
Head assembly: FSA Integrated 1 1/4 "upper - 1 1/2" lower sealed bearing
Handlebars: Oval Concepts 790 Aero Aluminum, 31.8mm clamp, 125mm drop, 75mm reach
Stem: Oval Concepts 790 Aero, 3D-forged, -17 with integrated computer mount
Grips: Anti-Slip Silicone
Saddle: Oval Concepts X38 with pressure relief zone, cromo rails
Seatpost: Oval Concepts Transonic Aero, 300mm 46-52cm / 350mm 54-61cm
Weight: 7.64 kg
Model year | 2020 |
Gears | 2x11 |
Groupset | Shimano Dura-Ace |
Material | carbon fiber |
Brakes | Road rim brakes |
product ID | 78209 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews