Cannondale Synapse Hi-Mod Disc Red eTap, 2019 model
Fork: Synapse Disc Asu mmetric, Ballistec Hi-MOD Carbon, SAVE, integrated crown race, 12x100 mm thru-axle, size-specific design - 44-48: 1 1/8" steerer, 60 mm rake 51-54: 1- 1 / 8" - 1-1 / 4" tapered steerer, 55
Cranks: SRAM RED Carbon, 50/34
Center composition: Cannondale Alloy PressFit30
Derailleur: SRAM RED stage, Mid cage
Derailleur: SRAM RED stage, Brage-on
Shifting: SRAM RED stage HRD, 2x11
Cassette: SRAM Force, 11-32, 11 -sPEED
Chain: SRAM PC-1170, 11-speed
Brakes: SRAM RED hydro disc, 160/160 mm Centerline rotors
Brake levers: SRAM RED stage HRD
Rims: Cannondale HollowGram Si, Carbon Clincher Disc, 19 mm inner, 35 mm deep, tubeless ready
Hubs: Cannondale HollowGram Sealed Bearing, straight pull, 12x100 front, 12x142 rear w / DT Swiss internals
Tip: Double-butted, Stainless
Tires: Vittoria Corsa, 700 x 28c
Handlebars: Cannondale Escape Hanger Carbon
Stem: Cannondale C1 Ultralight, 7050 Alloy, 31.8, 7 °, Integrated Garmin mount
Head composition: Synapse Si, 25 mm Carbon top cap
Saddle: Fabric Scoop Shallow Pro, carbon rails
Seat post : Cannondale SAVE Carbon, 25.4 x 350 mm (44-56), 400 mm (58-61)
Model year | 2019 |
Gears | 2x11 |
Groupset | SRAM Red, SRAM Force |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 73686 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews