Cannondale SuperSix EVO Hi-MOD 2 bike, black
Cannondale SuperSix EVO Hi-MOD 2 bike
Frame |
SuperSix EVO Hi-MOD Carbon, integrated cable routing w/ Switchplate, 12x142 mm Syntace thru-axle, BSA 68 mm threaded BB, flat mount disc, integrated seat binder, SmartSense compatible
|
Fork |
SuperSix EVO Hi-MOD Carbon, integrated crown race, 12x100mm Syntace thru-axle, flat mount disc, internal routing, 1-1/8" to 1-1/4" Delta steerer, 55 mm offset (44-54 cm), 45 mm offset (56-61 cm)
|
Fork |
SuperSix EVO Hi-MOD Carbon, integrated crown race, 12x100 mm Syntace thru-axle, flat mount disc, internal routing, 1-1/8" to 1-1/4" Delta steerer, 55 mm offset (44-54 cm) , 45 mm offset (56-61 cm)
|
Shifting |
Shimano Ultegra Di2 R8170, wireless, 2x12
|
Derailleur |
Shimano Ultegra Di2 R8150
|
Derailleur |
Shimano Ultegra Di2 R8150
|
Cassette |
Shimano Ultegra R8200, 11-30T, 12-speed
|
Chain |
Shimano Ultegra, 12-speed
|
Cranks |
Shimano Ultegra R8200, 52/36T
|
Brakes |
Shimano Ultegra R8170, 160/140 mm
|
Brake levers |
Shimano Ultegra Di2 R8170 hydraulic disc
|
Brake discs |
MT800 rotors
|
Wheelset |
HollowGram 50 R-SL, Carbon
|
Rims |
HollowGram 50 R-SL, Carbon, 20h front, 24h rear, 50 mm deep, 21 mm IW, tubeless ready
|
Hubs |
(F) HollowGram, sealed bearing 12x100mm centerlock / (R) HollowGram, 12x142mm centerlock w/ DT Swiss 240 internals
|
Spokes |
DT Swiss Aerolite, straight-pull
|
Tires |
Continental Grand Prix 5000, 700x25C
|
Seat post |
Cannondale C1 Aero 40 Carbon, 0mm offset (44-48 cm), 20mm offset (51-61 cm)
|
Seat post |
Cannondale C1 Aero 40 Carbon, 0 mm offset (44-48 cm), 20 mm offset (51-61 cm)
|
Saddle |
Prologo Dimension TiRox GDR, Titanium Rails
|
Stem |
Cannondale C1 Conceal, Alloy, 31.8, -6°
|
Handlebars |
Vision Trimax Carbon Aero
|
Bar tape |
Cannondale Bar Tape, 3.5 mm
|
Headset |
Integrated, 1-1/8" - 1-1/4"
|
Bottom bracket |
Shimano BSA 68
|
Extra |
Cannondale Gripper Aero Bottles & ReGrip Aero Cages, Shimano EC300 charging connector, Cannondale Wheel Sensor
|
Model year | 2023 |
Gears | 2x12 |
Groupset | Other |
Size | S, M, M/L, L, XL |
Colour | black |
Material | carbon fiber |
Wheel material | Carbon |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 213043 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews