Cannondale SuperSix Evo Disc Ultegra, model 2020, yellow
Bike fitting discount 50 % (you will save 70 €)
Fork: All-New, Ballistec Carbon, SAVE, 1-1 / 8 "to 1-1 / 4" steerer, integrated crown race, 12x100mm Speed Release thru-axle, flat mount disk, internal routing, 55mm offset (47-54cm ) 45mm offset (56-62cm)
Cranks: Cannondale 1, BB30, FSA rings, 52/36 or 50/34
Center composition: Cannondale Alloy PressFit30
Derailleur: Shimano Ultegra GS
Derailleur: Shimano, Brage-on
Gearing: Shimano Ultegra hydro disc, 2x11
Cassette: Shimano 105, 11 -32, 11-speed
Chain: Shimano HG601, 11-speed
Brakes: Shimano Ultegra hydro disc, 160 / 160mm RT54 rotors
Brake levers: Shimano Ultegra hydro disc
Rims: HollowGram Si, Carbon Clincher Disc, 19mm inner, 35mm deep, tubeless ready
Hubs: (F) HollowGram Sealed Bearing, straight pull, 12x100 / (R) HollowGram Sealed Bearing, straight pull, 12x 142
Spike: Formula Grand Forza
Tires: Vittoria Rubino Pro Bright Black, 700 x 25c
Handlebars: Cannondale 2, 7050 Alloy, Compact
Stem: Cannondale 2, 6061 Alloy, 31.8, 7 °
Head composition: SuperSix, 1-1 / 4 "lower bearing, 25mm top cap
Saddle: prologue Nago RS STN
Seatpost: All-New HollowGram 27 KNOT, Alloy, 2 bolt clamp, 330mm
Extra: Wheel Sensor
| Model year | 2020 |
| Gears | 2x11 |
| Groupset | Shimano Ultegra, Shimano 105 |
| Material | carbon fiber |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 97181 |
Mountain, city, cross-country
| Size | Rider height |
|---|---|
| XS | 147-160 cm |
| S | 157-170 cm |
| M | 165-177 cm |
| L | 175-187 cm |
| XL | 182-195 cm |
| XXL | 193-205 cm |
| Size | Rider height |
|---|---|
| 44 | 154-160 cm |
| 48 | 160-170 cm |
| 51 | 165-175 cm |
| 54 | 170-180 cm |
| 56 | 177-185 cm |
| 58 | 182-193 cm |
| 61 | 190-200 cm |
| Size | Rider height |
|---|---|
| Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews