Orbea RALLON E10 29/27.5 bicycle, white/black
Bike fitting discount 100 % (you will save 140 €) Free
Orbea RALLON E10 29/27.5 bicycle
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
| Frame |
Orbea Rallon OMR. 442 mm chainstay length. Concentric Boost 12x148 mm rear axle. Pure Gravity geometry. Attitude Adjust. ISCG05
|
| Fork |
FOX 38 Float Factory 180mm, Grip X2, QR15x110mm, Kashima
|
| Shock |
FOX Float X Factory Trunnion 2-Pos Evol LV Kashima custom tune 205x62.5 mm
|
| Shifting |
Shimano SLX M7100 I-Spec EV
|
| Derailleur |
Shimano SLX M7100 SGS Shadow Plus
|
| Cassette |
Shimano CS-M7100 10-51T 12-Speed
|
| Chain |
Shimano M6100
|
| Crankset |
Race Face Aeffect 32t
|
| Brakes |
Shimano M6120 Hydraulic Disc
|
| Wheels |
Race Face AR 30c Tubeless Ready
|
| Front tire |
Maxxis High Roller III 2.40" 60 TPI 3CG/EXO+/TR MaxxGripp
|
| Rear tire |
Maxxis Minion 2.40" 120 TPI 3CT/DD/TR MaxxTerra
|
| Seat post |
OC Mountain Control MC22, 31.6 mm, Dropper
|
| Saddle |
Fizik Terra Ridon X5 145 mm
|
| Stem |
OC Mountain Control MC11 Alu SL, 0º
|
| Handlebars |
OC Mountain Control MC30, Rise 20 mm, Width 800 mm
|
| Grips |
OC Lock On
|
| Headset |
Alloy 1-1/2", Black Oxidated Bearing
|
| Sex | Men, Unisex |
| Model year | 2026 |
| Gears | 1x12 |
| Groupset | Shimano SLX |
| Colour | white/black |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 29" (front wheel), 27.5" (rear wheel) |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 180 mm |
| Rear travel | 170 mm |
| Dropper post | yes |
| Shock type | Air |
| product ID | 384360 |
| Bike size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | < 165 cm | 165 - 175 cm | 175 - 185 cm | 185 - 198 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews