Lapierre Zesty TR 5.9 29 bike, red
Bike fitting discount 50 % (you will save 70 €)
Lapierre Zesty TR 5.9 29 bike
A powerful full-suspension bike, with which you can easily handle regular off-road riding and day-long trips in the mountains. Equipment with a good ratio of performance and endurance.
| Frame |
Zesty TR Supreme 5 alloy 120 mm travel (29"), pressfit, boost, metric, thru axle
|
| Fork |
FOX Rythm 34 Float Remote 2 Pos 15x110 mm, 130 mm (29")
|
| Shock |
FOX Float DPS Performance 3-position lever, LV Evol 165x45 mm Trunnion
|
| Shifting |
SRAM NX Eagle
|
| Derailleur |
SRAM GX Lunar Eagle, 12-speed
|
| Cassette |
SRAM PG1210, 11-50T
|
| Chain |
SRAM SX Eagle
|
| Crankset |
SRAM GX Eagle boost 148 Oak 12s 32T 165mm (S)/170mm (M)/175mm (L,XL)
|
| Brakes |
SRAM G2 R Diffusion Black 4 pistons
|
| Wheels |
Fastace 813 hubs/Rodi Ryot (622x25) alloy rims/Fastace 813 hubs/Rodi Ryot (622x25) alloy rims
|
| Front hub |
Lapierre by Fastace DF813, boost 15x110 mm, 32H
|
| Rear hub |
Lapierre by Fastace DR813, 4 sealed bearings, boost 12x148 mm, 32H
|
| Seat post |
Lapierre dropper post, Ø: 31.6 mm, travel 80(S), 100 mm (M), 130 mm (L/XL)
|
| Saddle |
Selle Royal Vivo
|
| Stem |
Lapierre alloy CNC, 0°, L: 45 mm (S/M), 50 mm (L), 55 mm (XL)
|
| Handlebars |
Lapierre alloy 6061DB, Width: 760 mm, Rise: 15 mm, Ø: 31.8 mm
|
| Bar tape |
Lapierre "Fit" grips, S/M: small size, L/XL: large size
|
| Headset |
FSA ORBIT ZERO STACK
|
| Sex | Men, Unisex |
| Model year | 2026 |
| Gears | 1x12 |
| Groupset | SRAM GX, SRAM NX, SRAM SX |
| Colour | red |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc |
| Fork | Air |
| Fork travel | 130 mm |
| Rear travel | 120 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| product ID | 228412 |
| Bike size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | < 170 cm | 170 - 179 cm | 180 - 189 cm | > 189 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews