Kellys Hacker 50 29 bike, black
Bike fitting discount 20 % (you will save 28 €)
Kellys Hacker 50 29 bike
Serious sports equipment, suitable for passionate cyclists who like to ride regularly, are not afraid of more demanding terrain and dare to stand at the start of local races. The bike equipment of this category is aimed at 100% reliability, durability and performance.
| Frame |
KELLYS iCAD Carbon Pro 29, tapered HT, internal routing, 12x148 mm Boost thru axle
|
| Fork |
RockShox Reba RL (29) Boost, 100 mm, Solo Air / Motion Control / OneLoc Remote Lockout / Maxle Stealth 15 mm thru axle
|
| Shifting |
Shimano SLX SL-M7100-R Rapidfire Plus
|
| Derailleur |
Shimano Deore XT M8100 (direct mount)
|
| Cassette |
SHIMANO CS-M7100-12 (10-51T)
|
| Chain |
KMC X12 (114 links)
|
| Crankset |
Shimano SLX M7100-1 Hollowtech II (34T) - length 175 mm
|
| Brakes |
Shimano Deore BL-M6000/BR-M6000 Hydraulic Disc, 160 mm/160 mm
|
| Rims |
KLS Cartel Disc 622x21 (32 holes)
|
| Hubs |
Shimano MT400-B / MT510-B Disc Center Lock (15x110 mm / 12x148 mm / 32 holes)
|
| Spokes |
SAPIM - stainless steel black
|
| Tires |
front: SCHWALBE Racing Ray Performance 57-622 (29x2.25) folding
rear: SCHWALBE Racing Ralph Performance 57-622 (29x2.25) folding |
| Seat post |
KLS Advanced - diam 30.9 mm / length 400 mm
|
| Saddle |
fi´zi:k Antares R7 S-alloy rails
|
| Stem |
KLS Advanced - diam 28.6 mm / bar bore 31.8 mm / 7° / length 80 mm (M), 100 mm (L)
|
| Handlebars |
KLS Advanced FlatBar - diam 31.8mm / width 720mm
|
| Grips |
KLS Poison OneLockon
|
| Headset |
FSA 1.5 integrated
|
| Bottom bracket |
Shimano Press-Fit BB-MT500-PA
|
| Pedals |
plastic
|
| Sex | Men, Unisex |
| Model year | 2022 |
| Gears | 1x12 |
| Groupset | Shimano XT, Shimano SLX, Shimano Deore |
| Size | M, L |
| Colour | black |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 100 mm |
| Dropper post | no |
| Control type | mechanical |
| product ID | 177555 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews