Mongoose Salvo 29 Comp bike, black
Bike fitting discount 20 % (you will save 28 €)
Mongoose Salvo 29 Comp bike
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Coil fork
Provides adequate comfort and is usually installed on bicycles for recreational and less demanding riding. The disadvantage is its relatively heavy weight.
Air shock
When buying a bicycle, it is necessary to set it to the required pressure according to the weight of the rider (specified by the manufacturer of the shock absorber, a shop assistant can also help you). Can provide several ride and suspension adjustment options. Requires regular check-up and is also more demanding to service. Compared to the spring one, it is significantly lighter.
29” wheels
The advantage is better terrain passability, better rolling and traction. However, they are heavier, which also applies to tires.
| Frame |
Tectonic T2, aluminum, 29" trail geometry, rocker link suspension, internal cable routing, 9 mm x 141 mm QR dropout convertible to 12 mm x 148 mm thru axle, replaceable hanger, tapered headtube, 100 m
|
| Fork |
SR Suntour XCM, 29", steel steerer, hydraulic lockout, 15 mm x 100 mm, thru axle, 100 mm travel
|
| Shock |
X-Fusion® 02 Pro RXL
|
| Derailleur |
SRAM SX Eagle
|
| Cassette |
SRAM, 12-speed, 11-50T
|
| Chain |
SRAM SX 12spd
|
| Cranks |
SRAM SX Powerspline, aluminum, 30T
|
| Brakes |
Shimano BR-M201/BR-MT200, hydraulic, aluminum, 160 mm rotor
|
| Brake levers |
Shimano BR-M201/BR-MT200
|
| Rims |
WTB ST-i29, aluminum double wall, 29 mm ID, 32H, tubeless compatible
|
| Hubs |
Shimano, aluminum, ball bearing, 15 mm x 110 mm, 32H, CENTER LOCKShimano FH-MT200B, aluminum, ball bearing, 9 mm x 141 mm QR, 32H, BRANTA Strive
|
| Spokes |
14G, stainless steel
|
| Tires |
Kenda Nevegal, 29 in x 2.25 in, wire bead
|
| Seat post |
Xposure, aluminum, 350 mm, zero offset, 31.6 mm
|
| Saddle |
Mongoose MTB, steel rails
|
| Stem |
Xposure 3D forged aluminum, threadless, 60 mm, 6°, 31.8 mm clamp
|
| Handlebars |
Xposure, double-butted aluminum, 760 mm width, 15 mm rise, 31.8 mm clamp
|
| Headset |
Threadless, ZS44/ZS56, retainer bearing
|
| Shift levers |
SRAM SX Eagle, 12-speed
|
| Sex | Men, Unisex |
| Model year | 2021 |
| Gears | 1x12 |
| Groupset | SRAM SX |
| Size | S, M, L, XL |
| Colour | black |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc |
| Fork | Spring |
| Fork travel | 100 mm |
| Rear travel | 100 mm |
| Shock type | Air |
| Control type | mechanical |
| product ID | 121837 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Sale -14% Leatt Endurance 6.0 Clip-in clipless pedals, black
119 €
-14%
RRP 169 €
Sale -52% Leatt HydraDri ProClip 8.0 Boa cycling shoes, black
from 139 €
-52%
RRP 289 €
Sale -53% Leatt ProClip 9.0 Race Boa cycling shoes, black
from 189 €
-53%
RRP 399 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
There are currently no reviews