Mondraker Foxy Carbon RR 29 MIND bike, marlin blue/carbon
Bike fitting discount 100 % (you will save 200 €) Free
Fork: Öhlins RXF 36 M.2 29, 160mm, TTX18 Twin Tube cartridge, tapered steerer tube, Boost 15x110mm axle, offset 44mm. Settings: high speed compression lever with climb mode, low-speed compression, rebound, air preload, ramp chamber
Head composition: Acros custom for 1-1/2
Derailleur: Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1
Shifting: Sram Trigger GX Eagle, 12s, X-Actuation 1:1
Brake levers: Sram G2 RS, SwingLink, tool-free reach adjust
Cranks: Sram GX Eagle, Boost, DUB axle, Direct mount chain ring, S/M size: 170mm, L/XL size: 175mm
Center composition: Sram DUB BSA, sealed bearings, 73mm
Handlebars: Onoff Sulfur Carbon 1.0, rise: 25mm, width: 780mm, 9º backsweep, 5º upsweep, 31.8mm barbore
Stem: Onoff Sulfur FG 30mm, 6061 forged alloy, 31.8mm barbore
Seatpost: Onoff Pija dropper internal, diameter 31.6mm, S size: 387x125mm, M size: 425x150mm, L/XL size: 465x170mm
Saddle: SDG BEL-AIR 3.0, LPU foam, steel rails
Front hub: DT 350, Boost 15x110mm, IS 6 bolts
Rear hub: DT 350, Boost 12x148mm, 36T SL Ratchet system, IS 6 bolts, XD freehub
Chain: Sram NX Eagle, 12s, Powerlock
Cassette: Sram XG-1275, 10-52T, 12s
Tip: DT Competition, straight pull
Tires: Maxxis Minion DHF 29x2.5 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding bead, Maxxis Minion DHR II 29x2.4 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding bead
Weight: 13.4 Kg
| Model year | 2022 |
| Gears | 1x12 |
| Groupset | SRAM GX, SRAM NX |
| Material | carbon fiber |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 191844 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.


There are currently no reviews