Lapierre Zesty CF 8.9 29 bike, empire green
Bike fitting discount 100 % (you will save 180 €) Free
Lapierre Zesty CF 8.9 29 bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
| Frame |
Zesty Full Carbon 150 mm travel (29''), pressfit, boost, metric, Thru axle
|
| Fork |
FOX 36 Float F-S Fit 4 3-pos 150 mm
|
| Shock |
FOX Float X, F-S, 2-pos, Trunnion 205*60 mm
|
| Derailleur |
Shimano Deore XT 12s Shadow +
|
| Cassette |
Shimano Deore 10-51T 12s
|
| Chain |
Shimano Deore 12s
|
| Crankset |
Shimano Deore XT 32T 165 mm (S), 170 mm (M,L), 175 mm (XL)
|
| Brakes |
Shimano Deore XT 203/180 mm
|
| Wheels |
DT Swiss XM1700 Spline / DT Swiss XM1700 Spline
|
| Tires |
F: Maxxis ASSEGAI 3C MAXXGRIP/NEXO+/TR 29X2.50 WT
R: Maxxis DISSECTOR 3C MAXXTERRA/NEXO+/TR 29X2.40 WT |
| Seat post |
TranzX RAD+ dropper, Ø: 31.6 mm, travel 125 mm (S), 150 mm (M), 170 mm (L, XL)
|
| Saddle |
Prologo Scratch M5 PAS
|
| Stem |
Lapierre Thirty One alloy, 0°, Ø: 31.8 mm, L: 35 mm (S), 45 mm (M, L, XL)
|
| Handlebars |
Lapierre Thirty One 6061DB, Width: 780 mm, Rise: 30 mm, Ø: 31.8 mm
|
| Grips |
Lapierre grips anodized, S/M: small diameter, L/XL: large diameter
|
| Headset |
Acros Integrated ZS56/ZS56 Block Lock
|
| Bottom bracket |
Shimano MT800 Press Fit
|
| Pedals |
XLC by VP VPE-527
|
| Sex | Men, Unisex |
| Model year | 2024 |
| Gears | 1x12 |
| Groupset | Shimano XT, Shimano Deore |
| Size | S, M, L, XL |
| Colour | empire green |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 150 mm |
| Rear travel | 150 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| product ID | 287934 |
| Bike size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | < 170 cm | 170 - 180 cm | 180 - 190 cm | 190 - 200 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews