Lapierre XRM 75th 29 bike, carbon
Lapierre XRM 75th 29 bike
The LAPIERRE XRM 75th is a light, dynamic, full-suspension cross country machine with really high performance for cyclists who want to dominate the competition. In addition to the goodies of the new XR line – longer reach and lower stack, smaller head angle and steeper seat angle, recessed cabling in the carbon frame and telescopic seat post – the XRM 75th boasts Fox Factory Kashima suspension, XTR shifting and brakes, and DT Swiss carbon rims. Another upgrade of the new range is more robust chainstays for greater rigidity and a more ingeniously shaped seat stay for greater comfort. In the upper frame tube there is a hole for guiding the cables of the handlebar lockout system. It also includes a handlebar stop protector on the upper frame tube, the possibility of using two bottle baskets and various converters.Frame |
NEW XRM full Carbon 100 mm travel 29" Team layup, pressfit, boost, metric, thru axle
|
Fork |
Fox 34 SC Factory-Series Float 3 Pos /remote boost FIT4 110 mm (29") 44 mm rake
|
Shock |
FOX FLOAT DPS, Factory-Series Remote up, Evol LV, 210x55 (Std/Std)
|
Shifting |
Shimano XTR 12s
|
Derailleur |
Shimano XTR RD-M9100, 12s
|
Cassette |
Shimano XTR CS-M9100 10-51T 12s
|
Chain |
Shimano XTR 12s (CN-M9100)
|
Cranks |
Race Face NEXT SL, 12S 32T 170 mm (S) / 175 mm (M/L/XL)
|
Brakes |
Shimano XTR 4 pistons
|
Rims |
DT Swiss / DT Swiss
|
Hubs |
DT Swiss / DT Swiss
|
Front tire |
Maxxis Rekon Race EXO TR 29x2.35 Rear
|
Rear tire |
Maxxis Ardent Race 3C Maxxspeed EXO TR 29x2.35 front
|
Seat post |
Race Face Turbine SL Ti, Ø: 31.6 mm, travel: 100 mm (all sizes)
|
Saddle |
PROLOGO DIMENSION NACK
|
Stem |
Race Face Turbine R Ø: 35 mm, L: 60 mm (S/M), 70 mm (L/XL)
|
Handlebars |
Race Face Next SL Carbon, Width: 740 mm, Rise: 10 mm, Ø: 35 mm bar bore
|
Grips |
Lapierre "Fit" grips, S/M: small size, L/XL: large size
|
Pedals |
NW-91K
|
Model year | 2022 |
Gears | 1x12 |
Groupset | Other |
Size | S, M, L, XL |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 110 mm |
Shock | Air |
Rear travel | 110 mm |
product ID | 151099 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews