Kellys Swag 50, model 2017
Bike fitting discount 20 % (you will save 28 €)
Frame size: S (17.5 ") / M (19") / L (21 ")
Fork: ROCK SHOX Pike RC (27.5), 160mm, Solo Air / Motion Control / Maxle Ultimate 15mm thru axle
Rear silencer: ROCK SHOX Monarch Plus RC3, Solo Air / Rapid Recovery / Open-Pedal-Lock (200x57mm)
Main composition: FSA 1.5 integrated
Medium composition: RACE FACE Press-Fit
Cranks: RACE FACE Aeffect (30) - length 175mm
Gear: SRAM GX 11-Speed X-Actuation Trigger (rear)
Converter : SRAM GX 1x11X-Horizon
Number of transfers: 11
Cassette pinion: SRAM XG-1150-11 (10-42)
Chain: KMC X11 (114 articles)
Brakes: SRAM Guide R Hydraulic Disc (4-piston)
Brake discs: front 180mm / rear 180mm
Brake levers: SRAM Guide R
Hubs: NOVATEC Disc XD (15x100mm / 12x142mm / 32 holes
Fixed axle: ROCK SHOX Maxle Ultimate - front 15x100mm / rear 12x142mm
Rims: KLS Valor Disc 584x23 (32 holes)
Tires : SCHWALBE Nobby Nic Performance 60-584 (27.5x2.35) folding
Stem: RACE FACE Respond - diam 28.6mm / bar bore 31.8mm / 10 ° / length 45mm
Handlebars: RACE FACE Respond RiseBar - diam 31.8mm / width 785mm
Handles: KLS Advancer LockOn 2Density
Seatpost: KS - LEV DX - Remote Telescopic - diam 30.9mm / length 385mm / stroke 125mm
Saddle: KLS Styx
Pedals: KLS Master - alloy
| Model year | 2017 |
| Gears | 1x11 |
| Groupset | SRAM GX |
| Material | aluminium |
| Control type | mechanical |
| product ID | 69991 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
I want to ask if you can also use classic threads or just presfit?
Automatically translated
Dobrý deň,
kedže rám je určený pre pressfit stredové zloženie, tak je možné použiť len takéto, prípadne podľa rozmerov domčeka je možné použiť "redukciu" - ak má rám priemer 46mm, tak napr. : https://www.mtbiker.sk/shop/komponenty/stredove-zlozenia/press-fit/aerozine-pf30c24-redukcia-z-pf30-na-bsa.html
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews