Kellys Swag 30, model 2016
frame size XS (15.5 ") / S (17.5") / M (19 ") / L (21")
fork ROCK SHOX Yari RC (27.5), 160mm, Solo Air / Motion Control / Maxle Ultimate 15mm thru axle
rear silencer ROCK SHOX Monarch RT, Solo Air / Rebound / Open-Pedal (200x57mm)
main composition FSA 1.5 integrated
medium composition SRAM PressFit GXP
cranks SRAM S1000 GXP (38x24) - length 170mm (S), 175mm (M - L)
SRAM X5 10-Speed Trigger
derailleur SRAM GX 10-Speed
SRAM GX 10-Speed converter
number of transfers 20
cassette pinion SRAM PG-1020-10 (11-36)
chain KMC X10L (112 links)
brakes SRAM DB5 Hydraulic Disc
brake discs front 180mm / rear 180mm
brake levers SRAM DB5
hubs KLS Stormer 15DH-FR Disc / FORMULA Disc (32 holes)
fixed axle ROCK SHOX Maxle Ultimate - front 15x100mm / rear 12x142mm
KLS Cartel Disc 584x21 rims (32 holes)
string stainless steel black
tires SCHWALBE Hans Dampf Performance 60-584 (27.5x2.35)
stem RACE FACE Chester - diam 28.6mm / bar bore 31.8mm / 8 ° / length 50mm
handlebars RACE FACE Respond RiseBar - diam 31.8mm / width 785mm
handles KLS Advancer LockOn gel
seatpost RACE FACE Chester - diam 30.9mm / length 325mm
saddle KLS Havoc
pedals KLS Master - alloy
product ID | 15786 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews