GT Zaskar 100 9R Expert Carbon mountain bike, model 2013
Bike fitting discount 50 % (you will save 70 €)
Frame - Full Carbon FOC Ultra Speed Blend, Triple Triangle, Tapered 1 1/8" - 1 1/2" Head Tube
Fork - ROCKSHOX REBA RL 29 SOLO AIR, travel 100 mm, damping adjustment, MAXLE axle, conical post
Damper - Fox Racing Shox Float CTD BV, 6.5x1.5
Cranks - SHIMANO SLX, 38/24 teeth
Central composition - SHIMANO SLX
Pedals - N/A
Derailleur - SHIMANO SLX
Derailleur - SHIMANO DEORE XT Shadow Plus
Shifting - SHIMANO SLX, 2x10
Cassette - SHIMANO DEORE, 10 speeds, 11-36 teeth
Chain - KMC X10
Rims - EASTON EXP360 29", 32 holes
Tires - MAXXIS ASPEN, 29"x2.1", 60TPI
Hubs - Easton XC 29" Wheelset 15x100mm
Wires - Easton XC 29" Wheelset
Brakes - FORMULA RX, discs 180/160mm
Brake levers - FORMULA RX
Handlebars - CRANKBROTHERS COBALT 2, width 680mm
Stem - EASTON EA50, slope 8°
Headstock - FSA NO.42 ACB, INTEGRATED, 1.5" LOWER, 1-1/8" UPPER
Saddle - FIZI:K TUNDRA2, Mg
Seatpost - CRANKBROTHERS COBALT 2
Color - Raw, White, Green
| Model year | 2013 |
| Material | carbon fiber |
| Control type | mechanical |
| product ID | 32242 |
| Size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews