GT Sensor Pro mountain bike, model 2014
COR Trail Philosophy Frame, 6069 Hydroformed Aluminum Frame, 130mm Travel AOS Suspension System w / Forged Linkage, Pivots, 1.5" to 1 1/8" Integrated Head Tube, & 12x142mm Maxl dropouts
Fork Fox 32 FLOAT 27.5 CTD FIT, 130mm Travel, 15QR, w / FIT Damper, Lockout & Rebound Adjust, Tapered Alloy steerer
Shock Absorber Fox Racing Shox Float CTD BV, 7.25" x1.75" Air Shock, w / Rebound Adjust & Lockout
RaceFace Evolve cranks, 42/32 / 22T, 3x10
RaceFace center composition
Pedals N / A
Shimano SLX derailleur, FD- M671 -D
Derailleur Shimano Deore XT Shadow Plus, Direct Mount, RD-M786-D
Shifting Shimano SLX, SL-M670, Rapid Fire
Cassette Shimano CS-HG81-10, 10-Speed, 11-36T
KMC X10 chain
Rims WTB STi23, UST Tubeless, 32H
Tires Continental X-King 27.5x2.4 ", protection Folding
Hubs (F) All Terra High Flange Alloy Disc, Sealed Bearing, 15x100mm Thru Axle, (R) All Terra High Flange Alloy Cassette Disc, Sealed Bearing, 12x142mm Thru Axle
Wires DT Competition, 1.8 / 1.6 Stainless, Black
Brakes Formula T1, w / 180mm Rotor (F / R)
Formula T1 brake levers, w/ TFRA & FCS
Handlebars Kore Durox AL6061 DB, 740mm
Kore Cubix Stem, 1-1/8" Threadless, 6 ° Rise, 31.8mm Clamp, 80mm
Orbit C-40-ACB head assembly
Saddle fizik Tundra2 mg
Seatpost RockShox Reverb Stealth, 34.9mm
All Terra Alloy Bolt-on seat post, 38.1 mm
Color blue
Model year | 2014 |
Gears | 3x10 |
Groupset | Shimano XT, Shimano SLX, Shimano Deore |
product ID | 69558 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews