GT Sensor Carbon ST PRO 29 bike, indigo
Bike fitting discount 50 % (you will save 70 €)
GT Sensor Carbon ST PRO 29 bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
| Frame |
Force XR Carbon 29” Frame, 120mm Travel, BSA 73mm, LockR Pivots, Tapered Head Tube, Boost 12x148 Thru-Axle, UDH, 185x47.5mm Trunnion Shock Mount, ISCG05
|
| Fork |
RockShox Pike Select + RC2, 140 mm, Charger 3, Debonair +, 44 mm Offset
|
| Shock |
RockShox Deluxe Select + RT, 185 x 47.5 mm, 2-Pos Adjust
|
| Shifting |
SRAM NX Eagle, 12-speed
|
| Derailleur |
SRAM GX Eagle
|
| Cassette |
SRAM PG-1230, 11-50T
|
| Chain |
SRAM NX Eagle, 12-speed
|
| Crankset |
Truvativ Stylo 6K, OAK, 32T
|
| Brakes |
SRAM G2 RSC Hydro Disc, 180/180 mm Centerline Rotors
|
| Rims |
WTB KOM Trail i27, 32h, Tubeless Ready
|
| Seat post |
GT DropKick, 31.6 mm, (S - 125 mm, M - 150 mm, L/XL - 170 mm)
|
| Saddle |
WTB Silverado
|
| Stem |
GT Alloy, 45 mm
|
| Handlebars |
GT Alloy Riser Bar, 20 mm Rise, 780 mm Wide, 5° Rise, 8° Back
|
| Grips |
GT MTB
|
| Headset |
FSA No.42
|
| Bottom bracket |
SRAM DUB BSA
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x12 |
| Groupset | SRAM GX, SRAM NX |
| Colour | blue |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 140 mm |
| Rear travel | 120 mm |
| Dropper post | yes |
| Shock type | Air |
| product ID | 237073 |
| Size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews