GT Sensor Carbon Elite, size M, model 2020 SAMPLE
Slightly damaged stickers on the fork and rear structure on the left.
Frame Sensor Carbon 29 ”Frame, 130mm Travel, BSA 73mm, LockR Pivots, Tapered Head Tube, Boost 12x148 Thru-Axle, 185x50mm Trunnion Shock Mount, ISCG05
RockShox 35 Gold RL fork, 140mm, 15x110mm, tapered steerer, 44mm offset
RockShox Deluxe Select + RT silencer, 180x50mm, Metric Trunnion
Cranks Truvativ Descendent 6K, Oak, 32t, 170mm (SL), 175mm (XL)
SRAM NX Eagle derailleur
SRAM Eagle gearshift, 12-speed
Cassette SRAM PG-1230, NX Eagle, 11-50, 12-speed
SRAM NX Eagle chain, 12-speed
TRP G-Spec Trail S hydro disc brakes, 180 / 180mm rotors
Brake levers TRP G-Spec Trail S hydro disc
Rims WTB ST i29 TCS, 32h, tubeless ready
Hubs Formula 15x110Formula 12x148 w / HG driver 12x148
Stainless Steel Wires, 14g
Stem GT Alloy Stem, 31.8mm Clamp, 45mm Length
Schwalbe Nobby Nic Peformance tires, 29 x 2.35 ", Addix Compound, tubeless ready Schwalbe Nobby Nic Peformance tires, 29 x 2.35", Addix Compound, tubeless ready
Handlebars GT Alloy riser bar, 15mm rise, 780mm width
Grips GT Statement2 Double Lock-on Grips
Head assembly FSA NO.42, Semi Integrated, Sealed Bearing, Tapered
Saddle WTB Silverado Sport, steel rails
Seatpost TranzX Dropper, 31.6, Internal Routing, 120mm (S, M), 150mm (L, XL)
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM NX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 97264 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews