GT Sensor 29 Carbon Expert bicycle, blue
Bike fitting discount 50 % (you will save 70 €)
GT Sensor 29 Carbon Expert bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
| Frame |
Sensor Carbon 29" Frame, 130 mm Travel, BSA 73 mm, LockR Pivots, Tapered Head Tube, Boost 12x148 Thru-axle, 185x50 mm Trunnion Shock Mount, ISCG05
|
| Fork |
RockShox Pike Select + RC, 140 mm, Charger 2.1 Damper, 15x110 mm Boost, 42 mm offset
|
| Shock |
RockShox Super Deluxe Select + RT, 185x50 mm Trunnion, Debonair
|
| Derailleur |
SRAM GX Eagle
|
| Cassette |
SRAM XG-1275
|
| Chain |
SRAM NX Eagle, 12-speed
|
| Cranks |
Truvativ Descendent 6K, Dub, 32T
|
| Brakes |
SRAM G2 RSC Hydro Disc, 180/180 mm Centerline Rotors
|
| Tires |
Maxxis Minion DHF, 29 x 2.5", 3C Maxx Terra, EXO/Maxxis Dissector, 29 x 2.4", 3C Maxx Terra, EXO
|
| Seat post |
GT Dropkick Dropper Post, 31.6, Internal Routing, 125 mm (S, M), 150 mm (L, XL)
|
| Saddle |
Fabric Scoop Shallow Sport, steel rails
|
| Stem |
GT Alloy Stem, 31.8 mm Clamp, 45 mm Length
|
| Handlebars |
GT Alloy Riser Bar, 30 mm Rise, 780 mm Wide, 5° Rise, 8° Back
|
| Shift levers |
SRAM GX Eagle, 12-speed
|
| Sex | Men, Unisex |
| Model year | 2021 |
| Gears | 1x12 |
| Groupset | SRAM GX, SRAM NX |
| Size | S, M, L, XL |
| Colour | blue |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc |
| Fork | Air |
| Fork travel | 140 mm |
| Rear travel | 130 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| product ID | 118722 |
| Size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews