GT Sensor 29 Carbon Expert 2020 DGR SAMPLE
Bike fitting discount 50 % (you will save 70 €)
Fork: RockShox Pike Select + Charger RC, 140mm, Debonaire, 15x110mm tapered steerer, 42mm offset
Damper: RockShox Deluxe Select +, 185x50mm, Metric Trunnion
Cranks: Truvativ Descendent 6K, Oak, 32T, 170mm (SL), 175mm (XL)
Shifters: SRAM NX Eagle, 12-speed
Cassette: SRAM XG-1275, GX Eagle, 10-50, 12-speed
Chain: SRAM NX Eagle, 12-speed
Derailleur: SRAM GX Eagle
Hubs: Formula 15x110Formula 12x148
Brakes: SRAM G2 RSC hydro disc, 180 / 180mm Centerline rotors
Stem: GT Alloy Stem, 31.8mm Clamp, 45mm Length
Head composition: FSA NO.42, Semi Integrated, Sealed Bearing, Tapered
Handlebars: GT Alloy riser bar, 15mm rise, 780mm width
Brake levers: SRAM Guide RSC G2
Wires: Stainless Steel, 14g
Tires: Schwalbe Magic Mary Evolution, 29 x 2.35", Snakeskin, Addix Soft Compound, tubeless ready Schwalbe Nobby Nic Evolution, 29 x 2.35", Snakeskin, Addix Speedgrip Compound, tubeless ready
Saddle: Fabric Scoop Shallow Sport, steel rails
Seatpost: GT Dropkick Dropper Post, 31.6, Internal Routing, 125mm (S, M), 150mm (L, XL)
| Model year | 2020 |
| Gears | 1x12 |
| Groupset | SRAM GX, SRAM NX |
| Material | carbon fiber |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 99784 |
| Size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews