GT Sensor 29 Carbon Expert 2019 mountain bike
Bike fitting discount 50 % (you will save 70 €)
Carbon allmountain machine on 29 "wheels with a stroke of 130 mm, with LTS suspension system and Sram Eagle 1x12 set.
Frame: All New Carbon sensor, 130mm rear wheel travel, carbon front / alloy rear frame, Boost 148 rear spacing, ISCG05 mounts, sealed bearing Lockr pivots, metric trunnion shock mounts, coil shock compatible
Fork: RockShox Revelation RC, 130mm Charger Damper, Debonaire, 15x110, tapered steer
Muffler: RockShox Deluxe RT3, 185x50mm, Debonaire, metric trunnion
Cranks: Truvativ Descendant 7K, oak, 32T
Middle composition: SRAM oak BSA
Gear levers: SRAM GX Eagle, 1x12
Cassette: SRAM XG-1295, X01 Eagle, 10-50, 12-speed
Chain: SRAM GX Eagle, 12-speed
Derailleur: SRAM X01 Eagle
Hubs: All Terra Alloy Disc 15x110 front, 12x148 rear
Brakes: SRAM Level TL hydro disc, 180/180 Centerline Rotors
Stem: All Terra, 1-1 / 8 "Threadless, 3D Forged, 31.8mm, 7 ° Rise, 60mm
Head composition: FSA Orbit C-40-ACB
Handlebars: All Terra Allo y Riser, Double-butted 6061, 15mm rise, 780mm
Brake levers: SRAM Level TL
Wires: Stainless Steel, 14g
Tires: Schwalbe Nobby Nic Performance 29 x 2.35 "Addix Speedgrip compound, tubeless ready
Saddle: Fabric Scoop Shallow Sport
Seatpost: KS Lev Si dropper, Southpaw Lever, 31.6mm, 125mm (M) 150mm (L-XL)
| Model year | 2019 |
| Gears | 1x12 |
| Groupset | SRAM X01, SRAM GX |
| Material | carbon fiber |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 72488 |
| Size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews